Broadband RF antenna for testing 380MHz..10GHz Aaronia HyperLOG 30100

• Frequency range: 23.5 MHz to 6 GHz
• Up to +18dBm output power (female SMA-connector)
• Smallest power level: -48dBm
• Up to 65dB dynamic range
• Frequency accuracy: 15Hz (<100MHz), 150Hz (<1GHz), 600Hz (<4GHz)
• Modulations: AM, FM, PM

 

• Compatible with any Spectrum Analyzer brand
• Design: Biconical (radial isotropic)
• Frequency range: 20MHz to 1GHz
• Max. input power: 5W AM (100MHz)
• Nominal impedance: 50 Ohm
• Gain: -9dBi (@100MHz)

 

• Frequency range: 400 MHz to 6 GHz
• Up to 3V/m output power (1m distance)
• Perfect for RF immunity measurements
• Perfect for RF attenuation measurements
• Highest power level: +18dBm
• Smallest power level: -45dBm

• Compatible with any Spectrum Analyzer brand
• Design: ACTIVE directional Logarithmic-periodic
• Frequency range: 400MHz to 2,5GHz
• Nominal impedance: 50 Ohm
• VSWR: <1:2 (typ.)
• Gain: 44dBi (typ.)

 

• Worlds first 9kHz to 3GHz Handheld Isotropic Antenna
• Suitable for any Spectrum Analyzer
• High Gain and Low Noise
• Built-in Bypass Preamplifier
• Manual or Automatic Axis Switch
• Battery or DC Powered
• Incl. Control Software

 

• Frequency range: 10MHz to 8GHz
• DANL: -145dBm(1Hz)
• DANL with Preamp: -160dBm(1Hz)
• Max. power at RF input: +10dBm
• Lowest sample time: 10mS
• Resolution (RBW): 1kHz to 50MHz
• Units: dBm, dBµV, V/m, A/m, W/m²(dBµV/m, W/cm² etc. via PC software)
• Detectors: RMS, Min/Max
• Demodulator: AM, FM, PM

 

• Design: Omni-Directional (radial isotropic)
• Frequency range: 300MHz to 8GHz
• Nominal impedance: 50 Ohm
• Peak Gain: 6.5dBi
• Avg. Gain: 3.5dBi
• Avg. VSWR: 2.5
• RF connection: SMA (m) or N (see optional adapter)

 

• Compatible with any Spectrum Analyzer brand
• Design: Directional Logarithmic-Periodic
• Frequency range: 380MHz to 10GHz
• Max. input power: 100W AM (400MHz)
• Nominal impedance: 50 Ohm
• VSWR: <1:2,5 (typ.)
• Gain: 5dBi (typ.)

 

• Compatible with any Spectrum Analyzer brand
• Design: Biconical (biconical dipole)
• Frequency range: 20MHz to 1GHz
• Max. input power: 5W AM (100MHz)
• Nominal impedance: 50 Ohm
• Gain: -18dBi (@100MHz)

 

• Frequency range: 1MHz to 9,4GHz
• DANL: -170dBm(1Hz)
• Max. power: +20dBm (opt. +40dBm)
• Lowest sample time: 5mS
• Resolution (RBW): 200Hz to 50MHz
• EMC filter: 200Hz, 9kHz, 120kHz, 200kHz, 1,5MHz, 5MHz
• Units: dBm, dBµV, V/m, A/m, W/m², dBµV/m, W/cm² etc.