LPDA Logarithmic Periodic Dipole Antenna 700MHz..2.5GHz Aaronia HyperLOG 7025

• Frequency range: 35 MHz to 4,4 GHz
• Up to +17dBm output power (female SMA-connector)
• Smallest power level: -48dBm
• Up to 65dB dynamic range
• Frequency accuracy: 15Hz (<100MHz), 150Hz (<1GHz), 600Hz (<4GHz)
• Modulations: AM, FM, PM

 

• Compatible with any Spectrum Analyzer brand
• Design: Directional Logarithmic-Periodic
• Frequency range: 380MHz to 18GHz
• Max. input power: 100W AM (400MHz)
• Nominal impedance: 50 Ohm
• VSWR: <1:2,5 (typ.)
• Gain: 5dBi (typ.)

 

• Frequency range: 30 MHz to 1000 MHz
• Up to 3V/m output power (0,5m distance)
• Perfect for RF immunity measurements
• Perfect for RF attenuation measurements
• Highest power level: +18dBm
• Smallest power level: -45dBm

• Spectran HF-80200 V5 (9kHz - 20GHz) Real-Time Handheld Spectrum Analyzer
• Frequency range: 9kHz to 20GHz
• Up to 175MHz Real-Time bandwidth
• POI below 1µS
• Real-time I/Q streaming via USB
• Very fast sweep mode, scans 20GHz in less than 20mS (in preparation)

 

• Compatible with any Spectrum Analyzer brand
• Design: ACTIVE directional Logarithmic-periodic
• Frequency range: 700MHz to 6GHz
• Nominal impedance: 50 Ohm
• VSWR: <1:2 (typ.)
• Gain: 45dBi (typ.)

 

• Frequency range: 100MHz to 6GHz
• Amplitude: -90dBm to 0dBm (typ.)
• Lowest sample time: 100mS
• Resolution (RBW): 100kHz to 50MHz
• Units: dBm, dBµV, V/m, A/m, W/m²(dBµV/m, W/cm² etc. via PC software)
• Detectors: RMS, Pulse
• Input: 50 Ohm SMA RF-input (f)
• Interface: Mini USB 2.0/1.1

 

• Frequency range: 1Hz to 1MHz (30MHz)
• Magnetic field (Tesla): 1pT to 2mT (typ.) expandable up to a amount of Tesla with PBS1
• Magnetic field (Gauss): 10µG to 20G (typ.) (only with option 006)
• Only with Option 009, 24bit resolution: 10nG to 20G (typ.) (Gauss)
• Electric field: 0,1V/m to 20kV/m (typ.)
• Resolution (RBW): 0,3Hz to 1MHz (1-3-10 step)
• Units: V, V/m, T, G, A/m

 

• Compatible with any Spectrum Analyzer brand
• Design: Horn antenna
• Frequency range: 4GHz - 40GHz (usable & directional from 700MHz up, specific calibration data from 18GHz up)
• Max. input power: 300W (peak)
• Nominal impedance: 50 Ohm
• Gain: up to 17dBi

 

• Frequency range: 1MHz to 9,4GHz
• DANL: -170dBm(1Hz)
• Max. power: +20dBm (opt. +40dBm)
• Lowest sample time: 5mS
• Resolution (RBW): 200Hz to 50MHz
• EMC filter: 200Hz, 9kHz, 120kHz, 200kHz, 1,5MHz, 5MHz
• Units: dBm, dBµV, V/m, A/m, W/m², dBµV/m, W/cm² etc.

 

• Compatible with any Spectrum Analyzer brand
• Design: Biconical (biconical dipole)
• Frequency range: 20MHz to 1GHz
• Max. input power: 5W AM (100MHz)
• Nominal impedance: 50 Ohm
• Gain: -18dBi (@100MHz)