LCR Meter 100 Hz..10 kHz TTi LCR400

• 10 MHz ..18.5 GHz bandwidth
• Measurement range from -50 dBm to +20 dBm
• Replacement solution for conventional power meter and sensor combination
• Simple USB connection to laptop or PC
• Use multiple sensors on one laptop or PC

 

• Compliance quality measurements to EN61000-3-2 and EN61000-3-3
• Measures peak or rms voltage or current, real or apparent power, power factor, phase
• Tabular/histogram of 40 harmonics

 

• 40 MHz sine
• 50 MHz square
• 4-channel independent or linked
• 100 MSa/s sample rate
• 12-bit vertical resolution

 

• Dual independent or tracking 600 watt outputs
• PowerFlex+ design gives ultra-wide range of voltage/current combinations
• Up to 80V and up to 50A within each power envelope

 

• 16 MHz sine and square
• Dual channel independent or linked
• 40 MSa/s sample rate
• 12-bit vertical resolution

 

• 0.003Hz to 3MHz frequency range
• High waveform quality at all frequencies & levels
• 2mV to 20V pk-pk from 50 Ohms or 600 Ohms

 

• 10MHz to 3600MHz or 6000MHz frequency range
• Resolution bandwidths from 300Hz to 10MHz (1:3:10)
• -120dBm typical noise floor at -40dBm ref. level/10kHz RBW
• Measurement in dBm or dBuV, mV or uW
• Zero span mode with AM and FM audio demodulation
• Trace modes of normal, peak hold and trace average
• USB interfaces for Flash drives and PC connection

 

• 10MHz to 6000MHz frequency range
• 10Hz setability, +/-1ppm frequency stability
• Locking to external frequency standard
• -110dBm to +7dBm amplitude, 0.1dB steps
• Full remote control through RS232, USB, LAN and GPIB

 

• Wide voltage and current range, 0 to 80 V and 0 to 80 A
• 300 watts continuous dissipation at 40 degrees C
• Versatile solution for testing dc power sources

 

• DC to 3 GHz range, 0.001mHz resolution
• Large 10 digit display with full range of annunciators
• Internal rechargeable batteries for portable use
• AC or DC coupling, 1M/50Ohm selection, polarity invert