Digital Function Generator 10 MHz TTi TG1000

• 100 Hz, 120 Hz, 1 kHz, 10 kHz Selectable Measurement Freq
• 0.1% basic measurement accuracy
• Dual 5 digit high brightness displays

 

• Frequency, period, pulse width, frequency ratio, duty cycle, and event counter modes
• DC to 6000MHz range, 0.001mHz resolution
• High impedance measurement up to 125 MHz
• AC or DC coupling, 1M/50Ohm selection, polarity invert
• Switchable attenuator, threshold control

 

• Dual independent or tracking 600 watt outputs
• PowerFlex+ design gives ultra-wide range of voltage/current combinations
• Up to 80V and up to 50A within each power envelope

 

• 0.1Hz to 10MHz frequency range
• Independent control of pulse frequency, width and delay
• 50ns minimum pulse width
• Squarewave, double pulse & delayed pulse modes
• Free-run, gated and triggered modes
• 50 Ohm output: 0.1V to 10V amplitude

 

• 0.03Hz to 3MHz frequency range
• Simultaneous display of frequency & amplitude
• High waveform quality at all frequencies & levels
• 2mV to 20V pk-pk from 50 Ohms or 600 Ohms

 

• 10MHz to 3600MHz or 6000MHz frequency range
• Resolution bandwidths from 300Hz to 10MHz (1:3:10)
• -120dBm typical noise floor at -40dBm ref. level/10kHz RBW
• Measurement in dBm or dBuV, mV or uW
• Zero span mode with AM and FM audio demodulation
• Trace modes of normal, peak hold and trace average
• USB interfaces for Flash drives and PC connection

 

• 40 MHz sine
• 50 MHz square
• Dual channel independent or linked
• 100 MSa/s sample rate
• 12-bit vertical resolution

 

• 10 MHz ..12.4 GHz bandwidth
• Measurement range from -50 dBm to +20 dBm
• Replacement solution for conventional power meter and sensor combination
• Simple USB connection to laptop or PC
• Use multiple sensors on one laptop or PC

 

• 40 MHz sine
• 50 MHz square
• Single channel
• 100 MSa/s sample rate
• 12-bit vertical resolution

 

• Up to 60 volts and up to 50 amps maximum
• PowerFlex design gives variable voltage & current combinations
• Higher current capability at lower voltages