DT-232 modules are double transmodulators DVB-S/S2 (QPSK/8PSK) to DVB-T (COFDM). Its QPSK/8PSK inputs can be tuned to any satellite transponder, releasing the output at UHF band.

Its allows changing many parameters including the frequency and the level of the output signals.

The double transmodulator DVB-S/S2 to DVB-T (DT-232) includes an internal combiner providing a single DVB-T output with high C / N rate. This feature gives great robustness to the signal so it allows the addition of RF amplifiers in cascade when distributing with minimal loss of
signal quality.

Each satellite receiver has an interface for Conditional Access Module (CAM). Different types of CAM can be used to decode one or more of the available encrypted programs and distribute them Free to Air.

DVB-S/S2 FI INPUT Connectors	2 independent DVB-S/S2 IF inputs 75 ? F-type, female
RF OUTPUT Connectors	2 independent combined DVB-T multiplexes Female BNC, 50 ? Impedance
TS PROCESSING Filtering Measurements	PID Filtering Table up to 32 PID Bitrate of the output multiplex Percentage of bitrate used (relative to the maximum capacity of the multiplex)

Recommended options

DT-800B	Control unit and power supply.
DT-802	Control unit and redundant power supply modules.
DT-900	Rack and wall mounted structure.
DT-900B	Rack mounted structure.
DT-901	Empty module plates..
DT-902B	Power CAM modules for smart cards..
CC-043	Supply and control cable with 3 connexions for DT-800B (included)
CC-044	Supply and control cable with 4 connexions for DT-800B (included)
CC-143	Supply and control cable with 3 connexions for DT-802 (included)
CC-144	Supply and control cable with 4 connexions for DT-802 (included)
OP-XXX-V	Output in the range 170-650 MHz for modules with DVB-T..
OP-800-P	Option required to use DT-800B with 3 x DT-730 modules
OP-212-D	Dual independent output for DT-212B
OP-504-S	TS-ASI output option for DT-504B

	RECEIVERS WITH ASI-TS OUTPUT
DT-302	Dual DVB-S/S2 receiver with CAM, ASI-TS output.
DT-312	Dual DVB-T receiver, ASI-TS output.
DT-324-M	IP receiver to ASI-TS output (MPTS).
DT-324-S	IP receiver to ASI-TS output (SPTS).

	IP STREAMERS
DT-421-M	IP Streamer. ASI-TS inputs, IP output (MPTS)
DT-421-S	IP Streamer. ASI-TS inputs, IP output (SPTS)

	COMBINERS - AMPLIFIERS
DT-700	4x1 quadruple DVB-T combiner .
DT-710	8 input DVB-T combiner with a 117 dBuV (+10 dBm) one single output.
DT-722	4 input DVB-T combiner with a 129 dBuV / 250 mW (+22 dBm) one single output.
DT-730	DVB-T amplifier with a 137 dBuV / 1 W (+30 dBm).
DT-610	Optical transmitter module
DT-620	Optical receiver module

More products PROMAX

OPTICAL FIBER VARIABLE ATTENUATOR 30 DB FTTH PROMAX PROLITE-330

• Extremely easy to use
• Low Insertion Loss (< 1 dB)
• Bi-directional
• Direct access to zero and maximum attenuation
• > 30 dB in all 1110-1650 nm range

PLC POWER LINE COMMUNICATIONS SPECTRUM ANALYZER & NOISE GENERATOR 1..50 MHZ PROMAX PROPOWER-5/1

• 1 - 50 MHz PLC Spectrum Analyser Propower-5
• 1 - 50 MHz PLC Noise Generator Propower-1
• field use and combined use
• st the network response to PLC test signals

RF POWER DVB-T AMPLIFIER COFDM SIGNAL 1W 30DBM PROMAX DT-730

• FREQUENCY BANDS: UHF from 470 MHz ~ 862 MHz
• 1 W RF power amplifier for COFDM signals
• both for single carrier or multicarrier system
• provides an amplified output of 30 dBm (137 dBµV)
• preserves the original signal quality and maintains a low noise levels

TRANSMODULATOR DVB-S -> DVB-T PROMAX DT-202

• DVB-S FI INPUT: 2 independent DVB-S FI inputs
• RF OUTPUT: 2 combined DVB-T multiplexes
• PID Filtering with Filtering Table up to 32 PID
• Measurement: Bitrate of the output multiplex
• includes an internal combiner that delivers a single DVB-T output with high C/N

PC PERSONAL COMPUTER TRAINING SYSTEM PROMAX EO-865

• assembly, installation and configuration of all the components composing a multimedia PC
• composed of widely spread and high reliability hardware components
• multiple test points enable the main electrical signals
• establish failure diagnostic and repairing methods

TRANSMODULATOR DVB-T -> DVB-T PROMAX DT-212

• RF INPUTS: 2 independent DVB-T inputs
• RF OUTPUT: 2 combined independent DVB-T multiplexes
• PID Filtering with Filtering Table up to 32 PID
• direct COFDM input that can be tuned to any multiplex
• ouput in the UHF band
• regenerate the quality of the multiplex when received from a noisy source
• change the input channel to another channel with total quality preservation

DIGITAL SATELLITE RECEIVER DVB-S/S2 -> ASI-TRANSPORT STREAM PROMAX DT-302

• DVB-S/S2 IF INPUT: 2 independent DVB-S/S2 inputs
• TS OUTPUT: 2 double independent DVB-ASI outputs
• allows inserting a Conditional Access Module (CAM)
• Selection of decrypted services by name

CATV CABLE NETWORK ANALYZER PROMAX-4

• measure the basic parameters to determine the quality of the signal in a CATV system
• different options depending on the needs
• one hand operation instrument with direct reading of the measurement
• illuminated LCD screen
• audio demodulator together with an speaker
• exchangeable input connector so to avoid damaging the instrument

TFT-LCD TRAINING SYSTEM FOR DVB-T PROMAX ET-893

• suitable equipment for the learning of the flat screen television sets operation
• equipped with TFT-LCD and Plasma technology
• allows the student to become familiar with Digital Terrestrial Television (DVB-T)
• includes a failures generation module

COFDM MODULATOR DVB-ASI/ SPI -> DVB-T/ DVB-H PROMAX MO-170

• MPEG-2 TS INPUTS: 2x DVB-ASI, 1x DVB-SPI
• IF OUTPUT: Fixed at 36 MHz
• RF OUTPUT: 45-875 MHz
• CONSTELLATIONS: QPSK, 16QAM, 64QAM