Line Impedance Stabilisation Network 9 kHz..30 MHz MTS LISN-2-16

• Highest quality materials for extended life time and high test appearance
• Economical solution for very high RF shielding levels and reproducible test scenarios to avoid time-consuming and expensive tests at EMC laboratories
• Usable for frequencies between 500 MHz to 6000 MHz, such as GSM / DCS / DECT / UMTS / RFID / ZigBee / Bluetooth / WLAN etc.
• Interior reflections reduction by RF foamabsorber material
• Optional: Additional reflection reduction byerrite absorbers beneath the foam absorber material(= Shielding Box MSB-0022)

 

• Frequency Range: 30 MHz - 3000 MHz
• Gain: 16 dB
• Output power P at -1 dB min. -15 dBm

 

• LISN according to CISPR, EN, VDE, ANSI
• Frequency range 9 kHz to 30 MHz
• International style (G, GB, F, I, CH, USA)
• Air-core coil
• Small insertion loss
• Operating voltage switchable (115/ 230V)
• Permanent current up to 2x 16A
• Calibrated according to CISPR 16-1:1999

 

• Frequency Range: 300..3000 MHz
• Type: EMC Wideband Antenna, logarithmical periodical
• Gain: 8 dBi typ.
• Power: 500 W CW (1000 W peak)

 

• LISN according to CISPR, EN, VDE, ANSI
• Frequency range 150 kHz to 30 MHz
• Permanent current up to 4x 250 A
• International style (G, GB, F, I, CH, USA)
• Operating voltage switchable (115/ 230V)
• Remote controlable over TTL-levels
• Calibrated according to CISPR 16-1:1999

 

• Various switch applications from DC to 40 GHz with electromechanical or solid state relays
• Switching unit for RF-generators, amplifiers and antennas at EMC test laboratories
• RF matrix
• Filter, diplexer, attenuator etc. selection unit
• Any automated routing of measurement equipment at test benches

 

• Frequency Ranges: 1..100 MHz ~ 300..3000 MHz
• Gain: 8.5..40 dB
• Output power P at -1 dB min. : 11..30 dBm
• Noise figure max.: 3.5..7 dB

 

• Time and cost saving through fast failure search with real RF signals instead of simulations
• Less error rate in test cases compared with software simulations
• Independency from RF-radiation of the environment
• Repeatable results
• Ideal working due to customized configuration
• Easy operation by manual control or by graphic user interface

 

• Highest quality materials for extended life time and high test appearance
• Economical solution for high RF shielding levels
• Usable for frequencies between 500 MHz to 6000 MHz
• Easy operation of the test samples directly through the built-in flexible wire mesh
• Weight optimized structure improves the mobility

 

• Frequency Range: 60MHz - 2000 MHz (effective use 20 MHz - 2000 MHz)
• Type: EMC Wideband Antenna, hybrid
• Gain: 8 dBi typ.
• Power: 500 W CW (1000 W peak)