Line Impedance Stabilisation Network 150 kHz..30 MHz MTS LISN-4-250

• LISN according to CISPR, EN, VDE, ANSI
• Frequency range 9 kHz to 30 MHz
• International style (G, GB, F, I, CH, USA)
• Air-core coil
• Small insertion loss
• Operating voltage switchable (115/ 230V)
• Permanent current up to 2x 16A
• Calibrated according to CISPR 16-1:1999

 

• Highest quality materials for extended life time and high test appearance
• Economical solution for very high RF shielding levels and reproducible test scenarios to avoid time-consuming and expensive tests at EMC laboratories.
• Usable for frequencies between 700 MHz and 4200 MHz, such as GSM / DCS / DECT / UMTS / RFID / ZigBee / Bluetooth /WLAN etc.
• Weight optimized structure
• Inside coated with RF absorber material

 

• Frequency Range: 60MHz - 6000 MHz (effective use 20 MHz - 6000 MHz)
• Type: EMC Wideband Antenna, hybrid
• Gain: 8 dBi typ.
• Power: 500 W CW (1000 W peak)

 

• Frequency Range: 9 kHz - 30 MHz
• Type: Active Magnetical Loop, hand-guided

 

• Highest quality materials for extended life time and high test appearance
• Economical solution for high RF shielding levels
• Usable for frequencies between 500 MHz to 6000 MHz
• Easy operation of the test samples directly through the built-in flexible wire mesh
• Weight optimized structure improves the mobility

 

• Frequency Range: 60MHz - 3000 MHz (effective use 20 MHz - 3000 MHz)
• Type: EMC Wideband Antenna, hybrid
• Gain: 8 dBi typ.
• Power: 500 W CW (1000 W peak)

 

• Frequency Range: 20..300 MHz
• Type: EMC Wideband Antenna, biconical
• Gain: 0 dBi typ.
• Power: 100 W (200 W peak)

 

• Highest quality materials for extended life time and high test appearance
• Economical solution for high RF shielding levels
• Usable for frequencies between 700 MHz to 4200 MHz, such as GSM / DCS / DECT / UMTS / RFID / ZigBee / Bluetooth /
• WLAN etc.
• Easy operation of the test samples directly through the built-in flexible wire mesh
• Weight optimized structure improves the mobility

 

• Highest quality materials for extended life time and high test appearance
• Economical solution for very high RF shielding levels and reproducible test scenarios to avoid time-consuming and expensive tests at EMC laboratories
• Usable for frequencies between 500 MHz to 6000 MHz, such as GSM / DCS / DECT / UMTS / RFID / ZigBee / Bluetooth / WLAN etc.
• Interior reflections reduction by RF foamabsorber material
• Optional: Additional reflection reduction byerrite absorbers beneath the foam absorber material(= Shielding Box MSB-0022)

 

• Frequency Ranges: 1..100 MHz ~ 300..3000 MHz
• Gain: 8.5..40 dB
• Output power P at -1 dB min. : 11..30 dBm
• Noise figure max.: 3.5..7 dB