34-channel portable logic analyzer
48-channel pattern generator with up to 300 MVector/s speed and 16 M vector depth
4 GHz (250 ps) timing zoom with 64 K memory
1.0 GHz / 500 MHz (half / full-channel) conventional timing with deep memory
500 MHz transitional timing
up to 250 MHz State clock rates
up to 250 Mb/s Data rates
up to 32 M acquisition memory depth
15-inch (38.1 cm) color display with touch screen available(option 103)
Comprehensive single-ended signal support, threshold is adjustable in -5 V to 5 V (10 mV increments)
Automated threshold/sample position setup for accurate measurements on high-speed buses
Simultaneous eye diagrams on all channels identify problem signals quickly
Selectable memory depths: 1 M, 4 M, 16 M, 32 M

Recommended options

16720A-011	TTL Clock Pod and Lead Set OPT
16720A-013	Data pod and lead set, 3-state TTL/CMOS
16720A-014	TTL Data Pod and Lead Set
16720A-015	Clock pod and lead set, 2.5 volt
16720A-016	Data pod and lead set, 2.5 volt
16720A-017	Clock pod and lead set, 3.3 volt
16720A-018	Data pod and lead set, 3-state 3.3 volt
16720A-021	ECL Clock Pod and Lead Set
16720A-022	ECL Terminated Data Pod and Lead Set
16720A-023	ECL Unterminated Data Pod Lead Set
16720A-031	Clock pod and lead set, 5 volt PECL
16720A-032	Data pod and lead set, 5 volt PECL
16720A-033	Clock pod and lead set, 3.3 volt LVPECL
16720A-034	Data pod and lead set, 3.3 volt LVPECL
16720A-041	Clock pod and lead set, 1.8 volt
16720A-042	Data pod and lead set, 1.8 volt
16720A-051	LVDS Clock Pod and Lead Set
16720A-052	LVDS Data Pod and Lead Set
16800A-0B3	Service Manual
16800A-103	Front Panel with 15 inch display and touchscreen
16800A-109	External removable hard drive for 16800 series logic analyzers
16821A-001	Standard 1 M acquisition memory depth
16821A-004	Increase acquisition memory depth to 4M
16821A-016	Increase acquisition memory depth to 16M
16821A-032	Increase acquisition memory depth to 32M
16821A-A6J	ANSI Z540 Compliant Calibration
E5346A	Probe, 34 channel single-ended Mictor connector, connects to 40-pin LA cable
E5383A	Probe, 17-channel single-ended flying leads, connects to 40-pin LA cable
E5385A	Probe, 34 channel single-ended Samtec connector, connects to 40-pin LA cable
E5394A	Probe, 34 channel single-ended soft touch connectorless, connects to 40-pin LA cable
E5394A-001	Retention Module
E5396A	Probe, 17 channel single-ended soft touch connectorless, connects to 40-pin LA cable
E5396A-001	Retention Modules
E5403A	Kit of 5 retention modules for Pro Series Soft Touch Connectorless Probes
E5404A	Probe, 34 channel, soft touch pro, single-ended, connects to 40-pin LA cable

More products KEYSIGHT

AGILENT 81150A PULSE FUNCTION ARBITRARY NOISE GENERATOR 240 MHZ

• 1 µHz - 120 MHz pulse generation with variable rise/fall time
• 1 µHz - 240 MHz sine waveform output
• 14-bit, 2 GSa/s arbitrary waveforms
• 1 or 2 channel, coupled and uncoupled

MULTIPLEXER MODULE QUAD 4-CHANNELS 75 OHM AGILENT 34942A

• Quad 4-channel multiplexers
• DC to 1.5 GHz, 75 Ohm
• High isolation, low VSWR
• 30V, 0.5A, 10W switching
• 75 Ohm mini SMB connectors

AGILENT E5061B ENA NETWORK ANALYZER 100 KHZ..1.5 GHZ/ 3 GHZ

• 100 kHz to 1.5 GHz / 3 GHz
• 5 Hz to 3 GHz Optional
• Transmission / Reflection test set
• S-parameter test set

PXI MICROWAVE SWITCH MODULE DC-26.5GHZ AGILENT M9155C

• Hybrid Dual SPDT Coaxial Switch Unterminated
• Broadband from DC to 26.5 GHz
• Unmatched isolation 92 dB at 8 GHz
• Long life cycles - 5 million cycles guaranteed, 10 million cycles typical

AGILENT 81110A 81111A PULSE GENERATOR 165 MHZ

• 1 mHz to 165 MHz
• 1 or 2 Channels(order 2 x 81111A modules)
• 2 ns to 200 ms variable transition time
• Up to 10 Vpp into 50 O (20 Vpp into open circuit)

PXI RF MATRIX SWITCH 3GHZ DUAL 1 X 4, 75 OHM AGILENT M9150A

• RF signal routing to 3 GHz for 75 ohm applications
• Dual 1x4 75 ohm RF switch multiplexer to 3GHz
• 30V, 1A, 10W switching
• 75 ohm input impedance
• 43 dB isolation at 1 GHz