Installation, commissioning & servicing of domestic / commercial oil, gas or biomass appliances
Safety checks
CO in a room or around an appliance
Combustion performance checks
Combustion efficiency checks
Flue Draught

Measures

CO2 direct with an infra-red sensor 0-20%
CO 0-10,000ppm
NO (High/Low optional upgrade)
Differential temperature
High accuracy differential pressure meter +/- 160mbar

Calculates

O2
CO/CO2 ratio
NOx (optional)
Excess air
Combustion efficiency

Fuels Types

Natural Gas
Butane
Propane
LPG
28 sec oil
35 sec oil
Wood pellets
User fuel x3

Box Contents

Analyser
Probe
Pressure connectors
Charger
Manual
Calibration report

Specification

May be subject to change

Parameter	Range	Resolution	Accuracy
Temp Measurement
Flue Temperature	0-600°C	0.1°C	±2.0°C ±0.3% reading
Inlet Temperature Internal Sensor	0-50°C	0.1°C	±2.0°C ±0.3% reading
Inlet Temperature External Sensor	0-600°C	0.1°C	±2.0°C ±0.3% reading
Flue Gas Measurement
Oxygen^*2	0-21%	0.1%	±0.3%
Carbon Monoxide^*1	0-20ppm 21-4,000ppm nom 4,001-10,000ppm 20,000ppm max for 15 mins	1ppm	±3ppm ±5% of reading ±10% of reading
Carbon Dioxide^*1	0-20%	0.1%	±0.3% volume
Efficiency (Net or Gross)^*2	0-99.9%	0.1%	±1.0% of reading
Efficiency High (C)^*2	0-119.9%	0.1%	±1.0% of reading
Excess Air^*2	0-250%	0.1%	±0.2% of reading
CO/CO₂ ratio^*2	0-0.999	0.0001	±5% of reading
** Pressure (differential)
Nominal range ±1600mbar	±1mbar	Maximum 0.001mbar	±0.05mbar
Maximum over range without damage to sensor is ±800mbar	±160mbar	< 25mbar	±3% of reading
Pre-programmed Fuels	Natural gas Propane Butane LPG Light Oils (28/35 sec) Wood Pellets plus 3 User Fuels
Storage Capacity	99 Combustion tests 20 Pressure tests 20 Tightness tests 20 Temperature tests 20 Room CO tests

^*1Using dry gases at STP
^*2Calculated


Ambient Operating Range	0°C to ±45°C - 10% to 90% RH non-condensing
Battery Type / Life	4 AA cells - > 8 hours using Alkaline AA cells
Chargers (optional)	220v charger, for NiMH batteries only
Dimensions
Weight:	0.8kg handset with protective cover
Handset:	200 x 45 x 90mm
Probe	300mm long including handle. 6mm diameter x 240mm long stainless steel shaft with 3m long neoprene hose. Type K thermocouple

Standard accessories

Box Contents

Analyser
Probe
Pressure connectors
Charger
Manual
Calibration report

More products KANE

KANE AUTOPLUS 4-2 AUTOMOTIVE EXHAUST GAS ANALYZER 4-GASES

• AUTOplus 4-2 Hand Held 4 Gas Analyser - CO, HC, CO2, & O2
• it can be used on Petrol/Gasoline, LPG, CNG & Diesel vehicles
• ideal for Pre-compliance testing, vehicle diagnostics and servicing to manufacturers specification
• Bluetooth
• USB/Serial with optional cable and software

KANE945 INDUSTRIAL EMISSIONS GAS ANALYZER KANE 945

• Upgradeable industrial emissions analyser with heavy duty pump
• Measures O2, CO, NO, NO2, SO2
• Calculates CO2, CO/CO2 ratio, Excess air, Combustion efficiency, *NOx (if NO sensor fitted)
• Fuels Types: Natural Gas, Butane, Propane, LPG, 35 sec oil, Heavy oil, Solid fuel, User fuel, 28 sec oil

KANE AUTO600 DIESEL SMOKEMETER AUTOMOTIVE GAS ANALYZER FOR CAR EMISSIONS

• AUTO600 Portable Diesel Smokemeter is designed to meet official test standards
• Ideal for: Car & Light Commercial Workshops, PSV Workshops, Fleet Operators
• Pre-Compliance Testing
• Servicing vehicles
• Local Authority and Environmental Testing
• Fully portable - AC & internal rechargeable battery
• Self calibration

KANE456 GAS ANALYZER FOR ALL INSTALLATIONS KANE 456

• Structured commissioning test
• Fast print
• Screen protection
• 6 line display
• Measures CO2 direct with an infra-red sensor, CO, Differential temperature, differential pressure meter
• Calculates O2, CO/CO2 ratio, Excess air, Combustion efficiency
• Fuels Types: Natural Gas, Butane, Propane, LPG, 28 sec oil, 35 sec oil, Wood pellets

KANE AUTO4-1 CLASS 1 OIML AUTOMOTIVE EXHAUST GAS ANALYZER

• Hand Held 4 Gas Analyser OIML Class 1
• Measures CO, HC, O2, CO2, and Lambda (or AFR)
• Pre-programmed Fuels Petrol, LPG and CNG
• Ideal for emissions diagnostics, tuning and regulated testing
• Store up to 250 Tests
• RPM and oil temperature measurements plus accessories.
• Prints via optional Infra-red printer.

KANE251 GAS ANALYZER BIOMASS KANE 251

• Entry level biomass analyser
• Measures CO 0-10,000ppm, CO2 0-20%
• Calculates O2, CO/CO2 ratio, Combustion efficiency
• Pre-programme fuels : Natural gas, Light Oil, Propane, Butane, LPG, Wood Pellets.

KANE AUTO4-4 AUTOMOTIVE EXHAUST GAS ANALYZER 4-GASES

• Measures CO, HC, O2, CO2, and Lambda (or AFR)
• Unique rotary switch to quickly select the parameters required
• Robust, reliable and accurate
• Weighing under 1kg, the handset fits comfortably in the hand
• Ideal for emission diagnostics, tuning and regulated testing.

KANE255 GAS ANALYZER FOR OIL BOILERS, DOMENSTIC INSTALLATIONS KANE 255

• OFTEC & HETAS Engineers favourite analyser
• Measures CO 0-2,000ppm, CO 0-20%, Temperature
• Calculates O2, CO/CO2 ratio, Combustion efficiency
• Pre-programme fuels : Natural gas, Light Oil, Propane, Butane, LPG, Wood Pellets

KANE451PLUS GAS ANALYZER KANE 451+

• High range 5 year life sensor - ideal for biomass appliances
• Measures CO2 direct with an infra-red sensor, CO, NO (High/Low optional upgrade), Differential temperature, differential pressure
• Calculates O2, CO/CO2 ratio, Combustion efficiency, Excess Air
• Pre-programmed Fuels: Natural gas, Propane, Butane, LPG, Light Oils (28/35 sec), Wood Pellets plus 3 User Fuels

KANE9206 QUINTOX INDUSTRIAL EMISSIONS GAS ANALYZER KANE 9206

• KANE9206 QUINTOX Fully featured emissions analyser
• For Industrial, Commercial, Oil, Biomass, Boiler Commissioning & Servicing, Monitoring
• Up to 5 additional electro-chemical sensors plus one complete infra-red module
• Measures O2, CO, NO, NO2, SO2, H2S
• Infrared Module for CO, HC, CO2
• Large Graphical Display
• Wireless link from the handset to the base unit
• GPS Location
• Wireless & USB connection to PC