600 A AC current measurement with fixed jaw
600 V AC and DC voltage measurement
True-rms ac voltage and current for accurate measurements on non-linear signals
6000 O resistance measurement
1000 µF capacitance measurement
State of the art signal processing allows for use in noisy electrical environments while providing stable readings
CAT IV 300 V, CAT III 600 V
Large, easy to read backlight display automatically sets the correct measurement range so you do not need to change the switch positions while taking a measurement
Safety conformance EN/IEC 61010-1:2001; 600V CAT III, 300V CAT IV
Three-year warranty
Soft carrying case

Standard accessories

Coated instruction card
Safety information sheet
Soft carrying case
TL75 test leads
Two AA Alkaline batteries

Recommended options

TL223 SureGrip™ Electrical Test Lead Kit
TL71 Test Lead Set
TL224 SureGrip™ Silicone Test Lead Set
AC72 Alligator Clip Set
AC285 SureGrip™ Alligator Clip Set
AC220 SureGrip™ Alligator Clip Set
AC87 Heavy Duty Bus Bar Clips
AC89 Heavy Duty Insulation Piercing Test Clip
TL75 Hard Point Test Lead Set
TP1 Slim Reach Test Probe (flat blade)
Fluke MeterCleaner Wipes
H3 Holster (330 Series)
C33 Soft Carrying Case
C1600 Gear Box for Meter and Accessories
C550 Tool Bag
LVD2 Volt Light
L206 Deluxe LED Hat Light
LVD1 Volt Light

More products FLUKE

FLUKE 287 HANDHELD DIGITAL DATA LOGGING MULTIMETER 4.5 DIGIT

• 4.5 digit large ¼ VGA display with white backlight
• 50,000 count
• 0.025% basic accuracy
• Logging function with TrendCapture

FLUKE 719PRO ELECTRIC PRESSURE CALIBRATOR

• Fluke-719Pro-30G -12 to 30 PSI / -0.8 to 2 bar
• Fluke-719Pro-150G -12 to 150 PSI / -0.8 to 10 bar
• Fluke-719Pro-300G -12 to 300 PSI / -0.8 to 20 bar
• Unique integrated electric pump for one handed pressure calibration
• Pressure measurement from internal or external sensor
• Sourced/simulated or measured mA values
• Temperature measured by optional RTD probe

HANDHELD LOOP CALIBRATOR FLUKE 707

• 0 to 28 V DC Voltage measure
• 0 to 24 mA Current measure
• 0 to 20 mA Current source / simulate
• mA accuracy of 0.015%

FLUKE VT04A INFRARED THERMOMETER WITH INTEGRATED CAMERA

• take simultaneous visual images with the thermal heat map images that are accurately aligned close in
• Temperature measurement range -10 °C to +250 °C (14 °F to 482 °F)
• Infrared spectral band 6.5 µm to 14 µm
• Minimum focus distance 50 cm (19.6 in)
• Field of View 28° X 28°
• 4 GB Micro SD card

PRESSURE CALIBRATOR FLUKE 717

• Measure pressure, 0.05% of full scale
• Measure mA with 0.015% accuracy and 0.001 mA resolution
• Measure pressure to 10,000 psi/700 bar

FLUKE CNX 3000 WIRELESS DIGITAL MULTIMETER

• AC and DC voltage measurements to 1000V
• AC and DC current with 0.01 mA resolution
• Continuity, resistance, diode test, capacitance and frequency measurements
• MIN/MAX Recording
• CAT III 1000 V, Cat IV 600V; IP54

VOLTAGE CONTINUITY TESTER FLUKE T90/ T110/ T130/ T150

• Voltage AC/DC 12V - 690V
• Continuity 0 - 400 k?
• Frequency 0 / 40 - 400 Hz
• Phase rotation
• Resistance measurement

HANDHELD VOLT/MA CALIBRATOR FLUKE 715

• 0 to 200 mV, 0 to 20 V Voltage measure
• 0 to 100mV, 0 to 10 V Voltage source / simulate
• 0 to 24 mA Current measure
• 0 to 20 mA Current source / simulate
• very high accuracy of 0.015% and 1 mA resolution

INFRARED NON-CONTACT THERMOMETER FLUKE 61

• Bright laser beam provides easy targeting
• Display clearly supplies data at a glance
• Shock-absorbing holster increases ruggedness
• 0.2 °C (0. 5 °F) resolution up to 275 °C (525 °F)
• Backlight illuminates the screen in the dark
• Automatic sleep mode after 7 seconds extends battery life
• Alkaline batteries provide 4000 typical measurements

HANDHELD LOOP CALIBRATOR FLUKE 705

• 0 to 28 V DC Voltage measure
• 0 to 24 mA Current measure
• 0 to 20 mA Current source / simulate
• mA accuracy of 0.02%