Wireless Display Inspection Video Camera Extech BR200

• Combines non-contact voltage and light detection with RF (Radio Frequency) transmission technology
• Remotely identifies mid-run AC wiring, circuit breakers, switched lines, AC outlets, and light fixtures
• Non-contact mid-run AC wiring identification without cutting into wires
• Lighting circuit identification using built-in light sensor

 

• Automatically stores up to 16,000 readings or manually store/recall up to 99 readings
• Large backlit LCD display with 40-segment bar graph
• Wide range to 40,000Fc or 400,000 Lux
• Cosine and color corrected measurements
• Utilizes precision silicon photo diode and spectral response filter
• Peak mode (10mS) captures highest reading

 

• Large LCD display with advanced illuminance functions and features
• Wide measurement range to 99,990Fc (999,900 Lux) with resolution of 0.001Fc and 0.01Lux
• Luminous intensity (candela) calculations
• Store and recall up to 50 measurements, includes relative or real time clock stamp
• Ripple function excludes the effect of stray light from the primary light source measurement
• Timed-Hold, Relative in absolute value or % deviation, and Comparator function with high low alarms

 

• 4" (10cm) vane allows for more precise readings on larger size ducts
• Air Velocity, Air Flow, Relative Humidity, Wet Bulb and Dew Point, Carbon Dioxide (CO2)
• Built-in thermistor for air temperature
• Multipoint and timed average calculations

 

• Troubleshoot electrical/electronic circuits and identify up to 16 local or installed lines
• MultiMeter functions include: AC/DC Voltage and Current, Resistance, Diode, and Continuity
• Transmitter/Receiver enables one person to remotely identify up to 16 wires
• Wire voltage check from 5 to 16VDC
• Data Hold and Max Hold, Auto power off

 

• ±29psi with 0.02psi resolution
• 8 selectable units of measure
• Zero function for offset measurements
• Data Hold, Auto power off, and Min/Max functions

 

• True RMS measurements for accurate AC Voltage and Current measurements
• AC/DC Voltage & Current, Resistance, Capacitance, Frequency (electrical/electronic), Temperature, Duty Cycle, Diode/Continuity
• Double molded for waterproof (IP67) protection, CAT IV-600V safety rating for industrial applications
• Data Acquisition Mode for real time data transmission directly to your PC
• 1000V input protection on all functions

 

• Large easy to read analog display
• Three test voltages 250V, 500V, and 1000V
• Insulation Resistance to 400MOhm
• Lock Power On feature for extended test times

 

• True RMS for accurate readings of noisy, distorted or non-sinusoidal waveforms
• Compact 0.8" (22mm) jaw size accommodates conductors up to 300MCM and allows measurements in tight locations
• Unique Smart Auto Sense feature
• Low Pass Filter (LPF) for accurate measurement of variable frequency drive signals
• Built-in Non-Contact Voltage (NCV) detector for quick detection of live voltage
• Inrush current measurement

 

• Selectable loads of 12, 15 and 20 Amps
• Measures loaded and unloaded AC Line Voltage
• Calculates and displays % Voltage Drop and Line Impedance
• Displays Peak Line Voltage and Frequency