Extech's MS420 20 MHz 2-Channel Digital Oscilloscope offers a range of capabilities for effective troubleshooting of electronics and electronically controlled electrical systems. With 20 MHz bandwidth and conveniences like auto-set which optimizes the position, range, time base, and triggering to assure a stable display of virtually any waveform, the MS420 can be used in field repairs or bench duty. To identify subtle problems, Peak Detect features a fast 50 ns glitch capture. Core functions like XY Mode, FFT function, Trigger Hold off, Waveform Math, Averaging Mode and Persistence Mode all ensure you can confidently troubleshoot problems using a variety of approaches. To start up recurring testing routines, you can store and recall up to 4 waveform screens and setups to save time from job to job. This CAT II-rated oscilloscope extends its functionality with complete DMM functions that are displayed on the large 3. 8" (97mm) color LCD display. The MS420 comes with two 1X/10X oscilloscope probes, test leads, Windows XP/Vista compatible USB software and cable, capacitor measuring module, adjustment screwdriver, AC adaptor/charger, hard carrying case, user manual, and manufacturer's one-year limited warranty.

Features:

Auto-set function optimizes the position, range, timebase, and triggering to assure a stable display of waveforms
Peak Detect function for 50ns glitch capture
XY Mode and FFT function to view component frequencies
Twenty Automatic Measurements including Frequency, Cycle, Average, Peak to Peak, RMS and more
Waveform Math: Add, Subtract, Multiply, and Divide
Average Mode for smoothing waveforms
Persistence Mode for observing dynamic signals
Store and recall up to 4 waveform screens and setups
USB interface and software for transferring waveforms and data

More products EXTECH

EXTECH 407730 DIGITAL SOUND LEVEL METER

• ±2dB accuracy with 0.1dB resolution
• A+C weighting
• AC analog output
• Record Max/Min values over time
• Utilizes 0.5"(12.7mm) electret condenser microphone

EXTECH CO10: CARBON MONOXIDE (CO) METER

• Easy to read 1999 count backlit displays CO levels from 0 to 1000ppm
• 1ppm resolution with ±5% or ±10ppm basic accuracy (whichever is greater)
• Utilizes a stabilized electrochemical gas specific (CO) fast response sensor
• Audible alarm starts at 35ppm
• Backlight for low light conditions

EXTECH CO30: CO (CARBON MONOXIDE) MONITOR

• Alternately displays Carbon Monoxide (CO) concentration, Air Temperature, and Relative Humidity readings (cycles approximately every 6 seconds)
• Visible bright tri-colored (green, yellow, red) LED alarm indicator
• Adjustable audible alarm for readings exceeding one of the selected ranges: 25ppm, 30ppm, 35ppm, 50ppm, 100ppm or 200ppm
• ZERO Re-Calibration function
• Manual Temperature and Relative Humidity Compensation (adjustable)
• CO Calibration function in fresh air

EXTECH EN150 11-IN-1 ENVIRONMENTAL METER WITH UV

• Built-in sensors measure Air Velocity, Air Flow, Temperature, Humidity, Wet Bulb, Dew Point, Heat Index, Wind Chill, Barometric Pressure, Altitude, and UV Light
• Field replaceable low friction vane wheel improves air velocity accuracy
• Backlit LCD display (auto off after 5 seconds)
• Data Hold, Auto Power Off
• Complete with built-in multiparameter sensors, wrist strap, and CR2032 battery

EXTECH DT100M LASER DISTANCE METER

• 2" to 330ft (0.05 to 100m) measurement range
• Automatically calculates Area and Volume
• Indirect measurement using Pythagorean theorem
• Continous mode with min/max function
• Displays Sum (+) / Difference (-) of multiple readings
• Front or rear edge reference

EXTECH DC400 400A DC MINI CLAMP METER

• High Accuracy and Resolution
• One touch "Auto Zero"
• Large 4000 count LCD display
• Easy to use, single function meter

EXTECH 380820 UNIVERSAL AC POWER SOURCE & AC POWER ANALYZER

• 99 memory locations for preset voltage and frequency output settings
• User-programmable Over Current Protection
• Programmable through the built-in RS-232 interface
• Data acquisition mode captures readings to your PC with a user-programmable sampling rate of 2 to 65,535 seconds
• Complete with AC power cord, RS-232 to USB cable and software

EXTECH LRK10 LIGHTING RETROFIT KIT

• Designed for professionals who routinely audit existing and replacement lighting systems for energy efficiency and lighting performance
• Kit includes:
• LT300 - Light meter with digital and analog display of light in Foot-candles or Lux
• DT200 - Compact laser distance meter with area/volume calculation functions
• Supplied in a soft carrying case that provides protection and organization for the meters whenever they are needed

EXTECH 401027 POCKET-SIZE FOOT CANDLE LIGHT METER

• Easy to operate Foot candle light meter with 2 ranges
• Convenient pocket size design
• Overrange indication

EXTECH MO55 COMBINATION PIN/PINLESS MOISTURE METER

• Displays moisture level in wood and building materials such as wall board, sheet rock, cardboard, plaster, concrete, and mortar
• Pinless moisture measurement depth to <1" (25mm)
• Audible Alert - Tone rate beeps faster as the moisture level increases
• Icons display low, medium and high levels of moisture content
• Easy-to-use, compact-sized design

Extech MS420 20MHz 2-Channel Digital OscilloscopeOBSOLET PRODUCT ( * OUT OF USE )

Extech MS420 20MHz 2-Channel Digital Oscilloscope
OBSOLET PRODUCT ( * OUT OF USE )