The Extech MO25 is a pen styled moisture meter that is light weight, compact and easy to use. After selecting one of ten moisture levels the user is signaled via audible alert and LED indicator lights that the object being tested surpasses the given threshold. This moisture pen features a data hold function, battery level check and automatically powers off when not in use. Use on wall board, sheetrock, cardboard, plaster, concrete and mortar. Complete with protective cap, built-in pocket clip, and one AAA battery.

Features:

Ideal for building restoration applications such as detecting water leakages inside walls ceilings and floors
Use on wall board sheet rock cardboard plaster concrete mortar paper fabric and more
Five dual color LEDs indicate 10 moisture levels:
- Green LEDs 5% 7% 9% 11% 12%
- Red LEDs 14% 16% 20% 30% 40%
Easy-to-use one button operation
Data Hold and Auto power off
Battery level check on power-up
Complete with protective cap, built-in pocket clip, and one AAA battery

More products EXTECH

EXTECH MN47 12 FUNCTION COMPACT MULTIMETER + NCV

• Built-in Non-contact Voltage Detector (from 100 to 600VAC)
• AC/DC Voltage, AC/DC Current, Resistance, Capacitance, Frequency, Type-K Temperature, Duty Cycle, Continuity / Diode
• Autoranging with manual override
• 4000 count high-contrast LCD display

EXTECH 380360 DIGITAL MEGOHMMETER

• Three test voltages of 250V, 500V and 1000V
• Insulation Resistance to 2000MOhm
• Safety Power Lock enables "hands free" operation for 3 minute test
• Automatic discharge when safety "Press to Test" button is released
• Continuity measurements to 200Ohm and Voltage to 600VAC

EXTECH MG320 CAT IV INSULATION TESTER/TRUE RMS MULTIMETER

• Measure Insulation Resistance to 20GO
• 5 Test Voltage ranges
• Polarization Index (PI) and Dielectric Absorption Ratio measurements (DAR)
• Low Resistance measurement with Zero function
• Programmable Timer feature sets the duration of test

EXTECH LRK10 LIGHTING RETROFIT KIT

• Designed for professionals who routinely audit existing and replacement lighting systems for energy efficiency and lighting performance
• Kit includes:
• LT300 - Light meter with digital and analog display of light in Foot-candles or Lux
• DT200 - Compact laser distance meter with area/volume calculation functions
• Supplied in a soft carrying case that provides protection and organization for the meters whenever they are needed

EXTECH CO10: CARBON MONOXIDE (CO) METER

• Easy to read 1999 count backlit displays CO levels from 0 to 1000ppm
• 1ppm resolution with ±5% or ±10ppm basic accuracy (whichever is greater)
• Utilizes a stabilized electrochemical gas specific (CO) fast response sensor
• Audible alarm starts at 35ppm
• Backlight for low light conditions

EXTECH LT45 COLOR LED LIGHT METER

• Measure White, Red, Yellow, Green, and Blue LED and Standard Lighting in Lux or Foot-Candle (Fc) units
• Manually store/recall up to 99 readings
• 4000 count LCD display
• Cosine and color corrected measurements
• Min/Max Average and Auto Power Off
• Complete with light sensor with protective cover and coiled cable expandable to 59" (1.5m), 9V battery, and hard carrying case

EXTECH 480846 8GHZ RF ELECTROMAGNETIC FIELD STRENGTH METER

• Mobile phone base station antenna radiation
• RF power measurement for transmitters
• Wireless LAN (Wi-Fi) detection/installation
• Wireless communication applications (CW TDMA GSM DECT)
• Microwave leakage

EXTECH PRT200 NON-CONTACT PHASE SEQUENCE TESTER

• 75 to 1000VAC input voltage with 45 to 65Hz frequency range
• LEDs indicate phase orientation (clockwise or counter-clockwise) and whether each phase is live
• Beeper sounds intermittently when correct phase is detected and continuously if phase is reversed
• Durable housing with back cover magnet for attachment to an AC distribution panel for easy measurement

EXTECH RHT50 HUMIDITY/TEMPERATURE/PRESSURE DATALOGGER

• Datalogs up to 10,000 readings with a user programmable sample rate
• USB interface for easy set-up and data download
• Selectable Atmospheric Pressure Units: psi, hPa, kPa, and bar
• Selectable data sampling rate from 1 minute to 18 hours

EXTECH CB20: CIRCUIT BREAKER FINDER/RECEPTACLE TESTER

• Quickly locate Circuit Breakers and Fuses
• Receptacle Tester (Transmitter): Test GFCI circuits, LED indication of 2 test conditions and 6 wiring faults, Test Reversed/Open Connections
• Complete with Receiver, Transmitter and 9V battery
• Microprocessor-based automatic sensitivity adjustment, Audible and visual indication, low battery indicator, Ergonomic design