The EN150 is a compact Hygro-Thermo-Anemometer with UV Light Sensor. 11-in-1 Environmental Meter for indoor and outdoor conditions. Built in UV sensor measures UV light level, natural sunlight measurements. Built-in sensors also measure Air Velocity, Air Flow, Temperature, Humidity, Wet Bulb, Dew Point, Heat Index, Wind Chill, Barometric Pressure and Altitude. Complete with built-in multiparameter sensors, wrist strap, and CR2032 battery.

Features:

� Built-in sensors measure Air Velocity, Air Flow, Temperature, Humidity, Wet Bulb, Dew Point, Heat Index, Wind Chill, Barometric Pressure, Altitude, and UV Light

� Field replaceable low friction vane wheel improves air velocity accuracy

� Backlit LCD display (auto off after 5 seconds)

� Data Hold, Auto Power Off

� Complete with built-in multiparameter sensors, wrist strap, and CR2032 battery

More products EXTECH

EXTECH SD750 3-CHANNEL PRESSURE DATALOGGER

• Triple LCD simultaneously displays 3 pressure channels
• Up to 5000psi with 4-20mA output
• 4-20mA input with readout in 9 units of measure
• Datalogger date/time stamps and stores readings on an SD card in Excel® format

EXTECH 380803 TRUE RMS POWER ANALYZER DATALOGGER

• Built-in Datalogger stores up to 1,012 readings (single record/continuous datalogging)
• Four simultaneous displays of Watts, Power Factor or VA, Voltage or Hz, Amps
• True RMS Voltage & Current measurements of sine, square, triangular and distorted wave forms with a crest factor < 5
• Plug device to be tested directly into the Power Analyzer

EXTECH EC210: COMPACT CONDUCTIVITY/TDS METER

• Compact Conductivity/TDS Meter Features
• Simultaneous display of Conductivity or TDS with Temperature
• Three ranges for Conductivity and TDS plus adjustable Temperature compensation factor to maintain accuracy
• Automatic Temperature Compensation
• Temperature compensation factor adjustable between 0 to 5.0% per °C
• Min/Max and Data Hold functions
• Auto Power Off with disable feature
• Use optional 1413?S Conductivity Standard (EC-1413-P) for calibration
• Complete with Conductivity cell and 39" (1m) cable, 9V battery, and soft case

EXTECH 401027 POCKET-SIZE FOOT CANDLE LIGHT METER

• Easy to operate Foot candle light meter with 2 ranges
• Convenient pocket size design
• Overrange indication

EXTECH PRT200 NON-CONTACT PHASE SEQUENCE TESTER

• 75 to 1000VAC input voltage with 45 to 65Hz frequency range
• LEDs indicate phase orientation (clockwise or counter-clockwise) and whether each phase is live
• Beeper sounds intermittently when correct phase is detected and continuously if phase is reversed
• Durable housing with back cover magnet for attachment to an AC distribution panel for easy measurement

EXTECH 380820 UNIVERSAL AC POWER SOURCE & AC POWER ANALYZER

• 99 memory locations for preset voltage and frequency output settings
• User-programmable Over Current Protection
• Programmable through the built-in RS-232 interface
• Data acquisition mode captures readings to your PC with a user-programmable sampling rate of 2 to 65,535 seconds
• Complete with AC power cord, RS-232 to USB cable and software

EXTECH 382260 80W SWITCHING MODE DC POWER SUPPLY

• Performs like 3 power supplies in one
• 3 selectable ranges: 0 to 16V/0 to 5A; 0 to 27V/0 to 3A; 0 to 36V/0 to 2.2A
• 4-Digit LED displays
• Front/Rear output terminals

EXTECH EMF300 MICROWAVE LEAKAGE DETECTOR

• Ideal for measuring high frequency radiation levels emitted from household and commercial microwave ovens
• 0 to 1.999mW/cm² measurement range
• Audible alarm and overrange indicator
• Peak Hold
• Complete with 9V battery

EXTECH EX365 10 FUNCTION TRUE RMS MULTIMETER

• Ideal for Industrial/Commercial appplications
• True RMS for accurate AC measurements
• 6000 count white LED backlit display
• Functions include: NCV, AC/DC Voltage, AC/DC Current, Resistance, Capacitance, Frequency, Diode Test, Continuity
• Fast 60-segment Analog Bargraph for viewing trends

EXTECH TG20 WIRE TRACER KIT

• Transmitter with output cables terminated in modular RJ11 phone connector
• Transmitter injects traceable signal into cables, checks telephone lines, and performs continuity checks
• Non-Contact probe audibly identifies selected wire or cable
• Easily trace wires from source to termination
• Test for properly operating phone lines