The EA80 checks for Carbon Dioxide concentrations using a maintenance-free dual wave NDIR (non-dispersive infrared) CO₂ sensor with a range of 0 to 6,000 PPM. It can automatically data log up to 20,000 data sets or you can manually enter up to 99 sets for later recall. Additional features include: auto power off, data hold, max/min with time stamp and alarm. Comes complete with six AAA batteries, Windows 95/98/NT/2000/ME/XP compatible software and an RS-232 interface cable.

Checks for Carbon Dioxide (CO2) concentrations
Maintenance free dual wavelength NDIR (non-dispersive infrared) CO2
CO2 measurement range: 0 to 6,000ppm
Temperature measurement range: -4 to 140°F (-20 to 60°C)
Humidity measurement range: 10 to 95%RH
Continuous (20,000 sets) or Manual (99 sets) datalogging
Complete with (6) AAA batteries, RS-232 cable, and Windows® compatible software

Specifications	Range	Resolution
Carbon Dioxide (CO2)	0 to 6,000ppm	1ppm
Temperature	-4 to 140°F (-20 to 60°C)	0.1°F/°C
Humidity	10 to 95%	0.1%
Dimensions/ Weight	5.3 x 2.8 x 1.2" (135 x 72 x 31mm)/ 8.2oz (235g)

More products EXTECH

EXTECH AN25 HEAT INDEX ANEMOMETER

• Built-in multiparameter sensors measure Air Velocity, Heat Index, Wet Bulb Globe Temperature (WBGT), Humidity, Ambient Temperature, Dew Point, Wet Bulb, Temperature, and Windchill
• MIn/Max/Average (5sec/10sec/13sec)
• Data Hold, Auto Power Off with disable
• Replaceable Mini impeller (vane)
• Complete with CR2032 battery

EXTECH 380580 BATTERY POWERED MILLIOHM METER

• Four terminal Kelvin measurements
• Over-temperature and over-voltage protection
• 5 ranges with 100µOhm max resolution
• Invalid test indicators prevent inaccurate measurements
• Built-in water resistant case with shoulder strap

EXTECH HD750: DIFFERENTIAL PRESSURE MANOMETER (5PSI)

• ±5psi range, 11 Selectable units of measure
• Max/Min/Avg recording and Relative time stamp
• Data Hold, Auto power off and Zero function
• Large LCD display with backlighting

EXTECH MF100 AC/DC MAGNETIC FIELD METER

• Utilizes Hall effect sensor with ATC (Automatic Temperature Compensation)
• N pole/S pole indicator
• Zero button for DC measurement
• Data Hold and Min/Max
• Auto power off with disable
• Complete with uniaxial magnetic probe sensor and protective cover, 9V battery, and hard carrying case

EXTECH 382260 80W SWITCHING MODE DC POWER SUPPLY

• Performs like 3 power supplies in one
• 3 selectable ranges: 0 to 16V/0 to 5A; 0 to 27V/0 to 3A; 0 to 36V/0 to 2.2A
• 4-Digit LED displays
• Front/Rear output terminals

EXTECH SD500 HUMIDITY-TEMPERATURE DATALOGGER

• Dual LCD simultaneously displays Relative Humidity and Temperature readings
• Datalogger stores readings on an SD card in Excel® format for easy transfer to a PC
• Selectable data sampling rate: 5, 10, 30, 60, 120, 300, 600 seconds or Auto
• Complete with six AAA batteries, SD memory card, universal AC Adaptor, and mounting bracket

EXTECH LT300 LIGHT METER

• Wide range to 40,000Fc or 400,000 Lux with max resolution to 0.01 Fc/Lux
• Relative mode indicates change in light levels, peak mode captures highest reading
• Remote light sensor on 12" (30.5cm) coiled cable - expandable to 24" (61cm)
• Utilizes precision photo diode and color correction filter
• Large LCD display with analog bargraph
• Backlight for readings in low light levels
• Complete with 9V battery, light sensor with protective cover, protective holster, and soft case

EXTECH CT70: GFCI AND AC CIRCUIT ANALYZER

• Selectable loads of 12, 15 and 20 Amps
• Measures loaded and unloaded AC Line Voltage
• Calculates and displays % Voltage Drop and Line Impedance
• Displays Peak Line Voltage and Frequency

EXTECH MG310 DIGITAL INSULATION TESTER

• Test Voltages of 250V, 500V, and 1000V
• Measure Insulation Resistance to 5.5GOhm (autoranging)
• AC Voltage measurement from 30 to 600V
• Polarization Index measurement (PI)
• Dielectric Absorption Ratio measurement (DAR)

EXTECH EX810 1000A AC CLAMP METER WITH IR THERMOMETER

• Non-contact InfraRed Temperature measurements with laser pointer
• Peak hold captures inrush currents and Transients
• MultiMeter functions include AC/DC Voltage, AC Current, Resistance, Capacitance, Frequency, Diode, and Continuity
• 1.7" (43mm) jaw opening for conductors up to 750MCM or two 500MCM
• 4000 count backlit display
• Autoranging with manual range button