Frequency	E Mode: 10 kHz - 30 MHz H Mode: 100 kHz - 300 MHz
Input Impedance	50 ?
Max RF Input Power	10 kW
RF Connector	1-5/8" EIA
VSWR	2:1 typical

Applications

ISO-11451-2
SAE J551/11
MIL-STD 461

Standard accessories

6 m (19.7 ft) long Conducting Elements with Retracting Wire Bundles
Support frame assembly
Motorized Winch and Pulley Assembly
RF Load with Ground Connections
RF Feed Box with Ground Connections
Waveguide Feed-thru Penetrations for the Chamber Ceiling
Ground Connection Sockets for the Chamber Floor

Recommended options

Automation of Balun Box Switches
Height/separation Control Connection Outside of the Chamber
8 m (26.2 ft) long Elements

More products ETS-LINDGREN

HIGH PERFORMANCE POWER FILTERS FOR TEMPEST/ EMI/ EMC TEST CURRENTS 16..200A ETS-LINDGREN N500X

• Low power dissipation
• Compact Rugged Construction
• 100dB insertion loss from 40kHz
• Suitable for 400Hz supplies
• Current Range 16 to 200 Amperes

ELF MAGNETIC FIELD SURVEY METER 5..2000 HZ ETS-LINDGREN HI-3627

• 5 - 2000 Hz
• 0.2 mG - 20 G
• Three Concentric Orthogonal Field Sensors
• True RMS Detection
• Isotropic Response
• 100dB Dynamic Range

PASIVE LOOP SHIELDED ANTENNA FOR SHIELDING AND IMMUNITY TESTING 1 KHZ..30 MHZ ETS-LINDGREN 6509

• Frequency Minimum 1 kHz
• Frequency Maximum 30 MHz
• Connectors Type N (f)
• Impedance (Nominal) 50 ?
• Maximum Input Power 1 kW
• Pattern Type omnidirectional
• Polarization linear

RF ATTENUATION AND ELECTROMAGNETIC SHIELDING METER 8..64 MHZ ETS-LINDGREN MF-130D

• Measurement frequencies: 8 MHz, 16 MHz, 32 MHz and 64 MHz
• Makes Shielding Attenuation
• MIL-STD-285 Measurements
• NSA 65-6 Measurements
• IEEE STD-299 Measurements
• EN 50147-1 Measurements
• Stores/Downloads up to 63
• Includes Windows® Compatible Easy-To-Use, Portable Software

ELECTRIC & MAGNETIC FIELD RF INDUSTRIAL COMPLIANCE TESTER 10..42 MHZ ETS-LINDGREN HI-3408

• 13.56 MHz, 27.12 MHz, 40.68 MHz Cal Frequencies
• Field Intensity Bar Graph
• On-Board Data Logging and Review
• Low Cost EMF Detection
• Electric and Magnetic Field Strength Measurements
• Data Logging (Up to 112 Points)

RFI/ EMI FEED-THROUGH CAPACITORS FOR AC/ DC CIRCUIT SUPPLY ETS-LINDGREN L265X

• All brass construction
• Excellent dv/dt characteristics
• These filters have NATO stock number codification
• High voltage proof withstand
• Design to meet Class Y specification

ACTIVE RECEIVING LOOP ANTENNA 10 KHZ..30 MHZ ETS-LINDGREN 6502

• Frequency Minimum 10 kHz
• Frequency Maximum 30 MHz
• 1 dB Comp. Point 5 V/m
• Connectors BNC (f)
• Dynamic Range 125 dB @ 1 MHz, 85dB @ 10 kHz
• Impedance (Nominal) 50 ?
• Pattern Type omnidirectional
• Polarization linear

LINE IMPEDANCE STABILIZATION NETWORK ETS-LINDGREN

• Insulated Plugs for Safer Power Connections
• Coils Matched for Application
• Individually Calibrated
• One Piece, Multi-Line Design for Convenience

LINEAR POLARIZED LOG PERIODIC ARRAY ANTENNA 100 MHZ..1 GHZ ETS-LINDGREN 3150

• Frequency Minimum 100 MHz
• Frequency Maximum 1 GHz
• Connectors 7/8 EIA Flange (others available)
• Impedance (Nominal) 50 ?
• Maximum Continuous Power 2 kW
• Pattern Type directional
• Polarization linear

HORIZONTAL/ VERTICAL ELECTRIC FIELD GENERATOR 10 KHZ..30 MZ ETS-LINDGREN 5502

• Generates vertical or horizontal electric field
• Generates Fields 200 v/m in the 10 kHz to 30 MHz Frequency Range
• Fully Adjustable Height and Separation of Main Conductors
• Large Immunity Volume
• Chamber Supported