CATV Signal Level Meter Deviser DS1001
OBSOLET PRODUCT ( * OUT OF USE )

Code: Deviser DS1001


 

Datasheet PDF, 0.3 Mb

Description

DS1001 is specially designed for CATV system maintenance, which features small size (160mm×130mm×65mm), light weight (less than 600g), long operating time (more than 6 hours), and well-built from appearance to architecture. It includes the most practical functions such as Level, V/A, Tilt, Trunk voltage measure and also supports measuring dual channels and displaying the data. Aseismatic design makes this meter more durable than you can expect, even it can continue to work well after being dropped from 5 meters high.

 

  • Level, V/A, Tilt, Trunk voltage measure
  • Tilt and C/N measure
  • supports measuring dual channels and displaying the data
  • Customized channel plan
  • Mini size and light weight
  • Aseismatic design

 

Frequency

Frequency

Range 46 MHz~864MHz

Accuracy

±50ppm

Tuning Resolution

50kHz

Level Measurement

Range

30dBµV~120dBµV

Accuracy

±2dB @ 25?

Resolution

0.5dB

Voltage

Input Range

1V~100V (AC/DC)

Accuracy

±2V

Resolution

1V

 

More products DEVISER

DEVISER TC601A HANDHELD GIGABIT ETHERNET TESTER

• Smart Loopback at Layer 1/2/3/4
• Cable diagnostics
• Optical power measurement
• IP Tools: Ping, TraceRoute, IPv4 and

 

CERTIFICATION AND QUALIFICATION CABLE NETWORK TESTER CAT3 CAT5E CAT6 DEVISER TC500

• Designed for Ethernet systems
• Contains a main unit and a remote unit
• measures the speed and performance on CAT3, CAT5e and CAT6 cables
• according to ANSI/TIA/EIA-568-B and ISO/IEC 11801 to ensure the cable qualification
• Tone generator
• Two additional functions: Ping and BER Test
• Store at least 100 results
• Toolbox software to analyze the results on PC

 

DEVISER AE3100 SERIES HANDHELD OTDR

• Broad dynamic range coverage (28 - 39 dB)
• Minimum 5cm resolution
• Intelligent analysis of events
• Excellent stability and repeatability

 

DEVISER DS2460Q QAM ANALYSIS METER

• Client-based Toolbox management software for quick unit configuration
• USB Micro 2.0 port for PC data transfer
• Ethernet port for Ping function
• Optical Power Measurement and VFL (Visual Fault Location) available by option

 

DEVISER AE210 SERIES OPTICAL POWER METER

• Over 100 hours' working time with 2x AA rechargeable batteries
• New features: pair with LS300 Series Light Source to auto-verify source wavelength and run dual-? testing
• Identify fiber bends and faults with VFL function
• Auto shutdown and self-calibration
• USB interface and Toolbox software

 

DEVISER TC702 GIGABIT ETHERNET MODULE

• Packet stream generation and measurement
• Loopback discovery
• Smart Loopback and 802.3ah OAM Loopback
• Through mode

 

DEVISER SIGNALPROFILER E7042B

• Perform comprehensive spectrum and signal analysis for complete site profile and monitoring of signal environment
• Test MIMO 4x4 antenna performance
• Detect signal degradation and system performance over time with trace overlay

 

TV TESTER FOR ANALOG, DIGITAL CABLE DVBC AND HFC INTALLATION NETWORKS DEVISER DS6300C

• mainly applied for the installation of data service of HFC Network
• compatible with DOCSIS & Euro DOCSIS 1.1/2.0/3.0
• simple measurement of Analog TV, DVB-C and Spectrum
• 3.5 Inch TFT LCD
• USB storage and upgrade
• Toolbox - PC Management Software

 

DEVISER DS2580C DIGITAL TV QAM ANALYZER

• Analog TV measurements include: Level, V/A, HUM, C/N
• Auto-generates and saves up to 20 custom channel plans from a cable drop
• Auto test with pass/fail limits speeds up tests and simplifies results interpretation

 

DEVISER E7000L CABLE & ANTENNA ANALYZER

• Detect signal degradation and system performance over time with trace overlay
• Instant Pass/Fail status
• Manage your measurement data and test setups with Measurement Center Software
• Intuitive touchscreen user interface for easier, faster measurements