AARONIA OmniLOG 30800 Omni-directional isotrpic radial Antenna 300MHz..8GHz

Code: AARONIA OmniLOG 30800


 

Datasheet PDF, 0.41 Mb

Description

  • Compatible with any Spectrum Analyzer brand
  • Design: Omni-Directional (radial isotropic)
  • Frequency range: 300MHz to 8GHz
  • Nominal impedance: 50 Ohm
  • Peak Gain: 6.5dBi
  • Avg. Gain: 3.5dBi
  • Avg. VSWR: 2.5
  • Antenna factor: See data sheet graph
  • RF connection: SMA (m) or N (see optional adapter)
  • Temperature range: -20°C to +70°C
  • Shock: 40G at 10msec
  • Thermal Shock: -20°C bis +70°C
  • Dimensions (L/W/D):
    173x62x9mm
  • Weight: 54gr
  • Warranty: 10 years

 

Highlights:

  • Excellent cost effective antenna for radial isotropic measurement
  • Typical standard calibration data (on CD)
  • Coverage of various mobile radio frequency ranges
  • Very compact design
  • Can be used in the lab and for open-field applicatio

 

 

 

 

OmniLOG 70600

 

The OmniLOG® 30800 Antenna is specially developed as small and compact, broadband omnidirectional antenna. 
Despite its small size it covers an extremely wide frequency range of 300MHz to 8GHz. Within the most important frequency bands the antenna reaches very high gain up to 6.5dBi. It fits perfectly to the SPECTRAN Handheld Spectrum Analyzers but can also be used with any other Spectrum Analyzer brand.

The Antenna offers a heavy-duty 90° knuckle base with SMA connector. The knuckle base is freely adjustable into each position and fixed by two special ball pressure screws.

Every OmniLOG antenna goes through rigorous testing in our laboratories before dispatch. Its high-tech antenna-case (radome) offers protection against mechanical damage and environmental influence.

 

Made in Germany:

All Aaronia antennas are developed, individually produced and calibrated in Germany at the Aaronia factory. This guarantees highest standard so that Aaronia can offer every customer a full 10 years warranty for all EMC antennas.

 

Exhaustive Calibration data:

All Aaronia antennas include a complete high resolution (10MHz, 5MHz or even 1MHz steps!) calibration data set with an unmatched number of calibration points (on CD). This offers the ability to make a very accurate EMC measurement with any Spectrum Analyzer.

 

 

Examples for possible analysis and measurements within frequency range (300MHz - 8GHz):

LTE800

ISM868

GSM900

GSM1800

GSM1900

DECT

UMTS

WLAN

Microwave

Bluetooth

WiFi

etc.

 

Standard accessories

 

  • OmniLOG 30800 radial isotropic (omni directional) antenna
  • Typical calibration data on CD
 

More products AARONIA

LOGARITHMIC PERIODIC DIRECTIONAL ANTENNA 680MHZ..8GHZ AARONIA HYPERLOG 6080

• Compatible with any Spectrum Analyzer brand
• Design: Directional Logarithmic-Periodic
• Frequency range: 680MHz to 8GHz
• Max. input power: 50W AM (800MHz)
• Nominal impedance: 50 Ohm
• VSWR: <1:2,5 (typ.)
• Gain: 5dBi (typ.)

 

MILITARY OUTDOOR SPECTRUM ANALYZER FOR LOW FREQUENCY 1HZ..30MHZ AARONIA NF-XFR

• Frequency: 1Hz to 20MHz (30MHz)
• Analog Input 200nV to 200mV (typ.)
• Resolution (RBW): 0,3Hz to 10MHz (1-3-10 step)
• Units: Volt
• Detectors: RMS, Min/Max
• Demodulator: AM, FM

 

ACTIVE BROADBAND RF ANTENNA FOR TESTING 680MHZ..10GHZ AARONIA HYPERLOG 60100X

• Compatible with any Spectrum Analyzer brand
• Design: Active Logarithmic-Periodic
• Frequency range: 680MHz - 10GHz
• Nominal impedance: 50 Ohm
• VSWR (typ.): <1:2,5
• Gain (typ.): 45dBi

 

BROADBAND RF ANTENNA FOR TESTING 380MHZ..18GHZ AARONIA HYPERLOG 30180

• Compatible with any Spectrum Analyzer brand
• Design: Directional Logarithmic-Periodic
• Frequency range: 380MHz to 18GHz
• Max. input power: 100W AM (400MHz)
• Nominal impedance: 50 Ohm
• VSWR: <1:2,5 (typ.)
• Gain: 5dBi (typ.)

 

USB REMOTE SPECTRUM ANALYZER FOR HIGH FREQUENCIES 10MHZ..6GHZ AARONIA HF6060X

• Frequency range: 10MHz to 6GHz
• DANL: -135dBm(1Hz)
• DANL with Preamp: -150dBm(1Hz)
• Max. power at RF input: +10dBm
• Lowest sample time: 10mS
• Units: dBm, dBµV, V/m, A/m, W/m², dBµV/m, W/cm² etc.
• Demodulator: AM, FM

 

RF SPECTRUM ANALYZER 10MHZ..8GHZ AARONIA SPECTRAN HF6080

• Frequency range: 10MHz to 8GHz
• DANL: -145dBm(1Hz)
• DANL with Preamp: -160dBm(1Hz)
• Max. power at RF input: +10dBm
• Lowest sample time: 10mS
• Resolution (RBW): 1kHz to 50MHz
• Units: dBm, dBµV, V/m, A/m, W/m²(dBµV/m, W/cm² etc. via PC software)
• Detectors: RMS, Min/Max
• Demodulator: AM, FM, PM

 

LOW COST HANDHELD SPECTRUM ANALYZER AARONIA SPECTRAN HF2025E

• Frequency range: 700MHz to 2,5GHz
• Amplitude: -80dBm to 0dBm (typ.)
• Lowest sample time: 100mS
• Resolution (RBW): 1MHz to 50MHz
• Units: dBm, dBµV, V/m, A/m, W/m²(dBµV/m, W/cm² etc. via PC software)
• Input: 50 Ohm SMA RF-input (f)
• Interface: USB 2.0/1.1

 

AARONIA BPSG4 OEM RF SIGNAL GENERATOR 35MHZ..4.4GHZ

• Frequency range: 35 MHz to 4,4 GHz
• Up to +17dBm output power (female SMA-connector)
• Smallest power level: -48dBm
• Up to 65dB dynamic range
• Frequency accuracy: 15Hz (<100MHz), 150Hz (<1GHz), 600Hz (<4GHz)
• Modulations: AM, FM, PM

 

EMI/ EMC SPECTRUM ANALYZING GAUSSMETER 1HZ..30MHZ AARONIA SPECTRAN NF5030

• Frequency range: 1Hz to 1MHz (30MHz)
• Magnetic field (Tesla): 1pT to 2mT (typ.) expandable up to a amount of Tesla with PBS1
• Magnetic field (Gauss): 10µG to 20G (typ.) (only with option 006)
• Only with Option 009, 24bit resolution: 10nG to 20G (typ.) (Gauss)
• Electric field: 0,1V/m to 20kV/m (typ.)
• Resolution (RBW): 0,3Hz to 1MHz (1-3-10 step)
• Units: V, V/m, T, G, A/m

 

EMF TESLAMETER FOR MAGNETIC FIELDS 10HZ..400KHZ AARONIA SPECTRAN NF3020

• Frequency range: 10Hz to 400kHz
• Magnetic field (Tesla): 1pT to 100µT (typ.)
• Magnetic field (Gauss): 10µG to 1G (typ.)
• Electric field: 1V/m to 5.000V/m (typ.)
• Analog Input: 2µV to 200mV (typ.)
• Resolution (RBW): 1Hz to 100kHz (1-3-10 step)
• Units: V, V/m, T, G, A/m