The Circuit breaker analyzer system is widely used to test live tank oil, bulk-oil, vacuum, SF6 and other models, with different voltage level of high voltage circuit breaker, can also be used for opening and closing & contemporaneous performance of the low-voltage electrical appliances such as contactors and relays.In accordance with IEC standards IEC 62271-100:2008 High-voltage switchgear and control gear - Part 100: Alternating-current circuit-breakers.

(1) No need to choose sensors, a universal sensor can meet all models of circuit breaker mechanical properties testing.
  (2) The unique universal bracket with new fixture make it more convenient to acquire the speed signal, there are various models of circuit breakers special bracket, make the measurements more accurate.
  (3) Only one kind of connection with different testing methods, simple to use.
  (4) Powerful printing can print time data, the time fracture surface curve, time - speed curve, time - stroke curve and stroke - speed curve to facilitate the definition of the speed characteristics of circuit breakers at any time or any stroke.

Power Supply	Voltage : AC220V±10% Frequency : 50Hz±1Hz
Executive Standard	IEC 62271-100:2008 High-voltage switchgear and control gear - Part 100: Alternating-current circuit-breakers
Dimensions	Length330mmWidth260mmHeight200mm
Weight	5kg(Exclude accessories )
Security	Insulation resistance : >2MO
	Leakage Current : <1.000mA
	Dielectric Strength: Power connection line on the shell can withstand 1500V (50Hz RMS) 1 minute.
Service condition	Ambient temperature : -10?~40?
Measurement Accuracy	Time: ±(1%�reading +0.2ms)
	Speed: ±(1%�reading+0.5m/s)
	Stroke : ±(1%�reading+0.2mm)
Built-in operation power supply	DC30~250V Adjustable, instantaneous 20A

More products WEIS

Brand: Testyle

WIRELESS HIGH VOLTA PHASE INDICATOR AND SEQUENCE TESTYLE TE1600

• Intelligent High Voltage Wireless Phasing Tester
• high voltage circuits, substations phase measurement and phase sequence checking
• automatic calibration function: can calibrate the sampling phase and amplitude errors
• display the same phase or different phase, lead or lag, and a voice prompt
• phase angle from 1 degree to 360 degrees, intuitive phase diagram display
• 5 to 10 times capture rate per second, waveform dynamic real-time updates

Brand: Testyle

10KV MOA ZINC OXIDE LIGHTNING ARRESTER DC LEAKAGE CURRENT CHARACTERISTICS TESTER TESTYLE 1075

• 10KV MOA DC characteristic Tester
• automatic measurement of residual voltage values under 1mA
• leakage current values under 0.75mA of 10KV and below voltage rating MOA
• internal rechargeable battery
• Automatic completion of the testing process

Brand: Testyle

DISSIPATION FACTOR TG? TESTER TESTYLE TE8000

• Anti-jamming Capacitance and Dissipation Factor Tester
• Test methods: UST, GST, Anti- interference UST, Anti- interference GST
• Output power: 1.5KVA
• Capacitance Test Range: 10KV:0~40000pF
• 10kV output, no discharge, no leaks, no noise to the ground

Brand: Testyle

HIGH VOLTAGE TEST SET TESTYLE TE-HPM

• power frequency AC and DC high voltage measurement
• RC type voltage divider principle
• Equal-potential screening, low-voltage digital display, voltage direct-reading.
• High-quality components
• high pressure metal film resistors
• high voltage polyester capacitor

Brand: Testyle

CT TURN RATIO & VOLT-AMPERE CHARACTERISTICS TESTER TESTYLE TE5660

• output current, voltage, can meet most of the CT testing requirements
• Measuring relays and protection equipment
• Full automatic Tester
• automatically display Volt-Ampere curve
• fast, accurate, simple, and convenient
• Non-contact testing, high security

Brand: Testyle

HIGH VOLTAGE CIRCUIT BREAKER ANALYZER TESTYLE TE3036

• used to test live tank oil, bulk-oil, vacuum, SF6 and other models, with different voltage level of high voltage circuit breaker
• used for opening and closing & contemporaneous performance of the low-voltage electrical appliances such as contactors and relays
• No need to choose sensors, a universal sensor can meet all models of circuit breaker mechanical properties testing
• can print time data, the time fracture surface curve, time - speed curve, time - stroke curve and stroke - speed curve
• IEC 62271-100:2008

Brand: Testyle

TRANSFORMER OHMMETER FOR DC RESISTANCE MEASUREMENT TESTYLE TE2101

• rapid measurement of DC resistance of transformer windings, motor winding, reactor winding, arc-suppression coil, PT
• adopt advanced dual-power constant current source technology
• Measuring range : 20mO..20kO
• can build test current quickly, its test speed is hundreds of times of the bridge
• Strong anti-interference

Brand: Testyle

BREAKDOWN INSULATION OIL ANALYZER OF DIELECTRIC STRENGTH TESTYLE TE6080

• Automatic insulating Oil Tester, in accordance with IEC156
• full automatic determination of insulating oil dielectric strength
• easy to carry and operate on-site
• auto mixing, autostanding, auto step-up
• automatically record the breakdown voltage
• automatic cut power and go back to zero
• automatically calculate the average
• auto-print

Brand: Testyle

VACUUM BOTTLE CIRCUIT BREAKER TESTER TESTYLE TE3018

• Quantitative measurement of vacuum switch interrupter
• can measure whether the Circuit Breaker Vacuum Bottle in the normal range
• can calculate the life of some vacuum switches
• Needn’t to dismantle the vacuum switch when test on-site
• Accurate and reliable test results
• The test data can be saved, printed and checked

Brand: Testyle

GROUND RESISTANCE AND IMPEDANCE TESTER TESTYLE TE1510

• Used to measure grounding resistance
• different frequency multi-source method in one measurement: 45Hz and 55Hz
• hardware and software filtering technology to reduce measurement errors caused by power frequency
• High precision: only 0.005O Fundamental error
• measure the resistance component and reactance component
• 50 groups of measurement data can be saved
• small, light weight, easy to carry