Digital Function Generator 10MHz with Counter TTi TG1006

• 0.001Hz to 10MHz frequency range
• 6 digits or 1mHz resolution
• 1ppm stability and 10ppm one year accuracy
• Low distortion, high spectral purity sine waves

 

• 0.03Hz to 3MHz frequency range
• External seven digit 120MHz counter
• Precision internal lin/log sweep
• Internal/external AM up to 100%
• Simultaneous display of frequency & amplitude
• High waveform quality at all frequencies & levels
• 2mV to 20V pk-pk from 50 Ohms or 600 Ohms

 

• Frequency, period, pulse width, frequency ratio, duty cycle, and event counter modes
• DC to 6000MHz range, 0.001mHz resolution
• High impedance measurement up to 125 MHz
• AC or DC coupling, 1M/50Ohm selection, polarity invert
• Switchable attenuator, threshold control

 

• 30W to 130W Linear, Single, Dual & Triple Output
• Independent digital voltage and current meters for each output
• 4 digit resolution
• Switchable local or remote sensing
• Constant voltage or constant current operation

 

• 1 µHz to 50 MHz range(sine and square)
• 1 µHz resolution
• 128K points at up to 125MS/s Arbitrary waveforms
• True pulse generator with variable delay and variable rise/fall

 

• 120V or 250V, 90W, Linear, True Analog Control
• Linear regulation - for the best performance
• Ultra-compact design - uses up less space
• True Analog controls - for ease of use

 

• DC to 3 GHz range, 0.001mHz resolution
• Large 10 digit display with full range of annunciators
• Internal rechargeable batteries for portable use
• AC or DC coupling, 1M/50Ohm selection, polarity invert

 

• 1MHz to 2700MHz frequency range
• Resolution bandwidths of 1MHz, 280kHz or 15kHz
• -96dBm typical noise floor at -20dBm reference level
• Measurement in dBm or dBµV, mV or µW
• Zero span mode with AM and FM audio demodulation

 

• 150 kHz to 2 GHz frequency range
• 10 Hz setability, +/-1ppm frequency stability
• -127 dBm to +7dBm amplitude, 0.1dB steps
• AM, FM and Phase modulation, internal or external

 

• 10MHz to 3600MHz or 6000MHz frequency range
• Resolution bandwidths from 300Hz to 10MHz (1:3:10)
• -120dBm typical noise floor at -40dBm ref. level/10kHz RBW
• Measurement in dBm or dBuV, mV or uW
• Zero span mode with AM and FM audio demodulation
• Trace modes of normal, peak hold and trace average
• USB interfaces for Flash drives and PC connection