Rising fuel costs for thermal systems highlight more and more the need for efficiency monitoring using emission measurements. A practical, easy-to-use emission analyser for a variety of applications is therefore ideal. A compact design combined with reliable engineering makes the Testo 340 the suitable analyser for commissioning, service and maintenance work as well as measurements for monitoring purposes.

More reliability, more convenience and even more parameters�

The Testo 340 is equipped with an O₂ sensor as standard. Three additional sensors such as CO, CO_low, NO, NO_low, NO₂ or SO₂ can be individually configured at any time. This guarantees highest flexibility when adapting to changing applications and measurement jobs.

The Testo 340 must be equipped with a second gas sensor otherwise the analyser cannot function.

The automatic sensor protection

The measurement range extension for high gas concentrations protects the CO, CO_low, NO, NO_low and SO₂ sensors. In measurements on unfamiliar systems or under less ideal operating conditions, unexpectedly high emission values (e.g. CO concentrations up to 50,000 ppm) can occur. In these cases, the measurement range for a single sensor is automatically increased by 5 times. The sensor is not stressed any more than it would be at low concentrations. The sensors retain their maximum life time. The optional dilution of all sensors (factor 2) offers even more flexibility.

Big selection of flue gas probes

Different probe shaft lengths, diameters and temperature ranges ensure high flexibility for all applications.

More benefits are�

�the standard pressure- and flow-measurement.
�the automatically flow-controlled gas pump.
�the replaceable filters for the CO- and NO-sensor.
�the wide selection of fuels (18 standard and 10 user defined fuels).

The Testo 340 is the ideal tool for service, maintenance and inspections

The Testo 340 allows efficient commissioning, tuning, efficiency optimization and troubleshooting when servicing industrial burners. The robust housing with impact protection enables the use in the rough daily work.

The Testo 340 supports inspections and tuning work on stationary industrial engines. The separate NO and NO₂measurement allows a real NO_xmeasurement. The highly-resistant flue gas probes for industrial engines are specially designed for this application.

To reduce emissions from gas turbines, CO and NO measurements using Testo 340 in low ranges are necessary. The CO_lowand NO_low sensors are ideally suited to this task.

Data interfaces

It is easy to control measurements, read out, transfer and print measurement data. These data interfaces are selectable for easy communication and data transfer:

Bluetooth® 2.0 (up to 10 m without obstruction)
USB
Infrared interface (Communication with the Testo printer)

With the software "EasyEmission" you are able to read out, edit, archive and manage the data.

Standard accessories

More products TESTO

TESTO 425 - HOT WIRE ANEMOMETER

• Min/Max/Average values make comparisons fast and easy
• Compact thermal sensor is ideal for in-duct readings
• Measures air velocity from 0 to 4000 FPM
• Bright backlit display provides easy viewing in any environment

TESTO 557 SET DIGITAL MANIFOLD FOR REFRIGERATING SYSTEMS TESTING

• Calcul automat supraîncalzire / subracire în timp real: sunt evitate astfel calculele manuale, predispuse la erori
• Posibilitate de conectare la smartphone sau tableta: monitorizarea de la distan?a ?i documentarea valorilor
• Sonda Pirani pentru masurarea precisa a vacuum-ului, test de etanseitate compensat cu temperatura, masurarea presiunii mediului ambiant în mod automat
• Cei mai comuni 60 de agen?i frigorifici sunt stoca?i în instrument (actualizare posibila prin intermediul aplica?iei pentru mobil)

TESTO 755-2 - CURRENT / VOLTAGE METER WITH 200 A AC, 1000 V AC/DC, CONTINUITY, AND PHASE ROTATION TESTER

• Phase rotation tester and voltage range up to 1000 V
• Unique feature which allows the user to check for voltage using only a single lead
• Polarity detection for DC circuits
• Meter automatically detects testing in-process and selects correct meter configuration which saves time and optimizes accuracy

TESTO 480 - DIGITAL TEMPERATURE AND HUMIDITY METER

• High quality optional sensors for measuring air flow / temperature / humidity / pressure / degree of turbulence / heat radiation / CO2 / illumination intensity / PMV / PPD / WBGT
• High precision, integrated pressure difference sensor included
• Pro-software for easy and efficient analysis and logging included
• Intelligent calibration concept

TESTO 206 PH2 - INSTRUMENT KIT

• pH2 probe head for semi-solid food
• Automatic full-scale recognition
• Maintenance-free gel electrolyte
• Leak-proof storage gel

BASE (SMS-ALARM) - INCLUDING GSM MODULE FOR SMS ALARM

• Up to 150 probes can be connected
• Graphical display, 4 control keys
• Interfaces: radio, Ethernet, USB
• GSM module for sending alarm messages via SMS

TESTO 605-H1 - COMPACT THERMAL HYGROMETER

• Slim form factor is convenient for duct or ambient measurements
• Resilient Testo patented humidity sensor ensures long life
• Rotating display allows for easy reading of measurements
• Quick response sensor provides fast readout of measurements

TESTO 526-1 - DIFFERENTIAL PRESSURE MEASURING INSTRUMENT 0 TO 2000 HPA (ACCURACY &PLUSMN;0.1% OF F.V.)

• Temperature-compensated differential pressure sensor
• Multi-point and timed mean calculation
• Recording of measurement data with freely selectable measuring rate
• 2 probe inputs for pressure and temperature

TESTO 320 FLUE GAS ANALYZER FOR O2, CO2 AND CO 0632-3220

• High-resolution colour graphic display
• Quick and easy menu structure
• Storage space for 500 measurement values
• Measurement of flue gas, draught, pressure, ambient CO,
• differential temperature and gas leak detection
• O2 and CO sensor and flue gas probe with temperature probe
• TÜV-tested according to EN 50379, Parts 1-3

TESTO 826-T2 - INFRARED THERMOMETER WITH LASER MARKING FOR FOOD (6:1 OPTICS)

• Infrared thermometer measures the temperature without any contact and therefore in a non-destructive manner
• 6:1 optics and 1-point laser measurement spot marking
• Limit value monitoring with min./max. function, visual and acoustic alarm if limit values are exceeded
• In conjunction with the protective case TopSafe, the instrument is certified according to EN 13485 (TopSafe is included in the delivery)