68-channel portable logic analyzer
48-channel pattern generator with up to 300 MVector/s speed and 16 M vector depth
4 GHz (250 ps) timing zoom with 64 K memory
1.0 GHz / 500 MHz (half / full-channel) conventional timing with deep memory
500 MHz transitional timing
up to 450 MHz State clock rates
up to 500 Mb/s Data rates
up to 32 M acquisition memory depth
15-inch (38.1 cm) color display with touch screen available(option 103)
Comprehensive single-ended signal support, threshold is adjustable in -5 V to 5 V (10 mV increments)
Automated threshold/sample position setup for accurate measurements on high-speed buses
Simultaneous eye diagrams on all channels identify problem signals quickly
Selectable memory depths: 1 M, 4 M, 16 M, 32 M

Recommended options

16720A-011	TTL Clock Pod and Lead Set OPT
16720A-013	Data pod and lead set, 3-state TTL/CMOS
16720A-014	TTL Data Pod and Lead Set
16720A-015	Clock pod and lead set, 2.5 volt
16720A-016	Data pod and lead set, 2.5 volt
16720A-017	Clock pod and lead set, 3.3 volt
16720A-018	Data pod and lead set, 3-state 3.3 volt
16720A-021	ECL Clock Pod and Lead Set
16720A-022	ECL Terminated Data Pod and Lead Set
16720A-023	ECL Unterminated Data Pod Lead Set
16720A-031	Clock pod and lead set, 5 volt PECL
16720A-032	Data pod and lead set, 5 volt PECL
16720A-033	Clock pod and lead set, 3.3 volt LVPECL
16720A-034	Data pod and lead set, 3.3 volt LVPECL
16720A-041	Clock pod and lead set, 1.8 volt
16720A-042	Data pod and lead set, 1.8 volt
16720A-051	LVDS Clock Pod and Lead Set
16720A-052	LVDS Data Pod and Lead Set
16800A-0B3	Service Manual
16800A-103	Front Panel with 15 inch display and touchscreen
16800A-109	External removable hard drive for 16800 series logic analyzers
16822A-001	Standard 1 M acquisition memory depth
16822A-004	Increase acquisition memory depth to 4M
16822A-016	Increase acquisition memory depth to 16M
16822A-032	Increase acquisition memory depth to 32M
16822A-A6J	ANSI Z540 Compliant Calibration
E5346A	Probe, 34 channel single-ended Mictor connector, connects to 40-pin LA cable
E5383A	Probe, 17-channel single-ended flying leads, connects to 40-pin LA cable
E5385A	Probe, 34 channel single-ended Samtec connector, connects to 40-pin LA cable
E5394A	Probe, 34 channel single-ended soft touch connectorless, connects to 40-pin LA cable
E5394A-001	Retention Module
E5396A	Probe, 17 channel single-ended soft touch connectorless, connects to 40-pin LA cable
E5396A-001	Retention Modules
E5403A	Kit of 5 retention modules for Pro Series Soft Touch Connectorless Probes
E5404A	Probe, 34 channel, soft touch pro, single-ended, connects to 40-pin LA cable

More products KEYSIGHT

DIGITAL OSCILLOSCOPE 4 X 350 MHZ AGILENT DSO7034B

• 350 MHz bandwidth
• 2 GSa/s sample rate
• 4 analog channels
• Standard 8 Mpts MegaZoom III deep memory

AGILENT 33521A FUNCTION / ARBITRARY WAVEFORM GENERATOR 30 MHZ

• 30 MHz sine, square, and pulse bandwidth cover more applications
• 250 MSa/s, 16-bit sampling rate for higher time-resolution arbitrary waveforms

AGILENT DSO6014L MODULAR OSCILLOSCOPE 4 X 100 MHZ

• 100 MHz bandwidth
• 4 scope channels (upgradeable to MSO with 16 digital channels)
• 2 GSa/s sample rate, 2 Mpts stand memory
• LXI class C compliant

AGILENT N5230C PNA-L MICROWAVE NETWORK ANALYZER 300 KHZ..6/ 13.5/ 20/ 40/ 50 GHZ

• 300 kHz to 6 GHz, 2-port
• 300 kHz to 13.5 GHz, available in 2- and 4-port
• 10 MHz to 20 GHz, available in 2- and 4-port
• 10 MHz to 40 GHz, 2-port
• 10 MHz to 50 GHz, 2-port

AGILENT 6611C 6612C 6613C 6614C PROGRAMMABLE MULTIPLE POWER SUPPLY 25-160W

• Multiple sources in an integrated one-box solution
• Dual-range linear outputs
• 2, 3 or 4 independent isolated outputs
• Stable, low ripple and noise power source
• Measured V & I readback over GPIB

AGILENT E3640A E3641A E3642A E3643A E3644A E3645A E3646A E3647A E3648A E3649A DC PROGRAMMABLE POWER SUPPLIES 30-100W

• Single and dual outputs
• Dual range output
• 30 W to 100 W output power
• GPIB and RS-232 standard

PXI RF MATRIX SWITCH 3GHZ 1 X 16, 50 OHM AGILENT M9149A

• RF switching to 3 GHz
• 1x16 50 ohm RF switch multiplexer to 3GHz
• 30V, 1A, 10W switching
• 40 dB isolation at 1 GHz
• 1.3 dB insertion loss at 3 GHz

RF MULTIPLEXER MODULE 2 GHZ DUAL 1:4 75 OHM AGILENT 34906A

• Dual 4 Channel RF Multiplexer
• 2 GHz bandwidth, 75 Ohm
• Cascade together for up to 16:1 multiplexer
• BNC to SMB adapter cables included

AGILENT U8001A U8002A DC POWER SUPPLY 90/150W

• Excellent regulation (0.01% + 2mV; 0.02% + 2mA)
• Fast 50µsec transient response
• Low output noise of 1mVrms and 3mArms from 20Hz to 20MHz

AGILENT E8663D PSG RF SIGNAL GENERATOR 100 KHZ..3.2 GHZ/ 9 GHZ

• 100 kHz to 3.2 GHz or 9 GHz
• 0.001 Hz resolution
• -135 to +24 dBm typical output power with Option 1EU
• AM, FM, ØM, and pulse (may be simultaneously enabled)