4.5 digit
20,000 count resolution for precise measurements
0.05% basic accuracy
New - IP 67 waterproof & dustproof protection, completely sealed for use in
harsh environments
Peak min-max
True-rms ac voltage and current for accurate measurements on non linear
signals
Built in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument
Measure up to 1000 V ac and dc
Measure up to 10 A (20 A for 30 seconds)
10,000 µF capacitance range
Frequency to 200 kHz
Extended ac voltage bandwidth- 15 Hz to 20 kHz
Resistance, continuity and diode test
Min/Max and average recording to capture variations automatically
Unique function for accurate voltage and frequency measurements on adjustable speed motor drives and other electrically noisy equipment
Designed to withstand 3 meter drop (with holster)
New - Backlit keypad buttons allow for easy visibility in low-lit areas
Large display digits and 2 level bright white backlight for increased visibility
Reversible holster for added protection when not in use
Withstands hazardous 8,000 volt spikes caused by load switching and
faults on industrial circuits and complies with second edition IEC and ANSI
electrical safety standards
Long battery life (800 hours)
Relative mode to remove test lead resistance from low ohms measurements
Auto and manual ranging for maximum flexibility
Optional magnetic hanger for easy setup and viewing while freeing your
hands for other tasks
MSHA approval (pending)

Standard accessories

More products FLUKE

LOOP CURRENT PRECISION CALIBRATOR FLUKE 709

• Functions: mA source, mA simulate, mA read, mA read/loop power and volts read
• Best-in-class accuracy at 0.01% reading
• Small rugged design operates on (6) standard AAA batteries
• Intuitive user interface with Quick-Set knob for fast setup, easy use
• Built in selectable 250 ? resistor for HART communication

FLUKE 8808A DIGITAL BENCH MULTIMETER 5.5 DIGIT

• 5.5 digit resolution
• Basic V dc accuracy of 0.015 %
• Dual display

VOLTAGE CONTINUITY TESTER FLUKE T90/ T110/ T130/ T150

• Voltage AC/DC 12V - 690V
• Continuity 0 - 400 k?
• Frequency 0 / 40 - 400 Hz
• Phase rotation
• Resistance measurement

PRESSURE CALIBRATOR FLUKE 717

• Measure pressure, 0.05% of full scale
• Measure mA with 0.015% accuracy and 0.001 mA resolution
• Measure pressure to 10,000 psi/700 bar

FLUKE 1555 MEGOHMMETER INSULATION RESISTANCE 250V/ 10KV

• Resistance Test range: 2 TO
• Test voltage: 10 kV

FLUKE 190-504 190-504/S HANDHELD SCOPEMETER OSCILLOSCOPE 4X500 MHZ

• 4-channels isolated 500MHz
• CAT III 1000V / CAT IV 600V safety rated
• Dedicated 5000 Count digital multimeter in two-channel models
• Advanced automatic measurements, power (Vpwm, VA, W, PF) and time (mAs, V/s, w/s)
• IP-51 rated for dust and drip proof to withstand harsh environments
• Isolated USB ports for memory devices and PC connectivity

WIRELESS AC VOLTAGE MODULE FLUKE CNX V3000

• True-RMS AC voltage measurements to 1000V
• ±1% accuracy to 500 Hz, ± 2% accuracy to 1 kHz
• Memory recording up to 65,000 readings
• Backlit LCD display
• CAT IV 600 V, CAT III 1000 V; IP42

FLUKE 179 HANDHELD DIGITAL MULTIMETER 3.5 DIGIT

• 3.5 digit
• 6000 count resolution
• 0.09% basic accuracy
• True RMS voltage and current measurements
• Digital display with analog bargraph and backlight
• Temperature measurements

CARBON MONOXIDE TESTER FLUKE CO-220

• Rugged case and electronics.
• Large LCD displays CO levels from 0 to 1000 ppm.
• Bright back-light allows easy screen viewing under dim lighting conditions.
• Beeper triggers with increasing frequency as CO levels rise.
• MAX Hold function stores and displays the maximum CO level.
• Automatic sensor zeroing and self-test sequence upon start-up.

HANDHELD DIGITAL MULTIMETER ATEX SAFE 4.5 DIGIT FLUKE 87V EX

• 4.5 digit
• 6000 count resolution for precise measurements
• 0.05% basic accuracy
• True-rms ac voltage and current for accurate measurements on non linear signals
• Selectable filter for accurate voltage and frequency measurements on motor drives
• Built in thermometer lets you carry one less tool (TC probe included)
• ATEX safety rating Ex II 2 G Eex ia IIC T4