Broadband RF antenna for testing 380MHz..18GHz Aaronia HyperLOG 30180

• Compatible with any Spectrum Analyzer brand
• Design: Loop
• Frequency Range: 9kHz - 400MHz (1MHz - 40MHz with max. +/- 0,3dB deviation)
• Max. input level: 5W (usable as transmitting antenna)
• Conversion factor: 1 (0 dB A/m is 0dBm)
• Impedance: 50 Ohm
• RF connector: SMA (female)

 

• Frequency range: 1Hz to 1MHz (30MHz)
• Magnetic field (Tesla): 1pT to 2mT (typ.) expandable up to a amount of Tesla with PBS1
• Magnetic field (Gauss): 10µG to 20G (typ.) (only with option 006)
• Only with Option 009, 24bit resolution: 10nG to 20G (typ.) (Gauss)
• Electric field: 0,1V/m to 20kV/m (typ.)
• Resolution (RBW): 0,3Hz to 1MHz (1-3-10 step)
• Units: V, V/m, T, G, A/m

 

• Design: Omni-Directional (radial isotropic)
• Polarization: Linear
• Frequency range: 700MHz - 6GHz
• Impedance: 50 Ohms

 

• Frequency range: 50 MHz to 700 MHz
• Up to 3V/m output power (0,5m distance)
• Perfect for RF immunity measurements
• Perfect for RF attenuation measurements
• Highest power level: +17dBm
• Smallest power level: -48dBm

• RF frequency range: 10MHz to 6GHz
• DANL: -135dBm(1Hz)
• DANL with Preamp: -150dBm(1Hz)
• Max. power at RF input: +10dBm
• Lowest sample time: 10mS
• Resolution (RBW): 3kHz to 50MHz
• Units: dBm, dBµV, V/m, A/m, W/m²(dBµV/m, W/cm² etc. via PC software)
• Detectors: RMS, Min/Max
• Demodulator: AM, FM

 

• Compatible with any Spectrum Analyzer brand
• Design: ACTIVE directional Logarithmic-periodic
• Frequency range: 400MHz to 6GHz
• Nominal impedance: 50 Ohm
• VSWR: <1:2 (typ.)
• Gain: 45dBi (typ.)

 

• Compatible with any Spectrum Analyzer brand
• Design: Horn antenna
• Frequency range: 4GHz - 40GHz (usable & directional from 700MHz up, specific calibration data from 18GHz up)
• Max. input power: 300W (peak)
• Nominal impedance: 50 Ohm
• Gain: up to 17dBi

 

• Frequency range: 10MHz to 6GHz
• DANL: -135dBm(1Hz)
• DANL with Preamp: -150dBm(1Hz)
• Max. power at RF input: +10dBm
• Lowest sample time: 10mS
• Resolution (RBW): 3kHz to 50MHz
• Units: dBm, dBµV, V/m, A/m, W/m², dBµV/m, W/cm² etc.

 

• Compatible with any Spectrum Analyzer brand
• Design: Biconical (radial isotropic)
• Frequency range: 30MHz to 1GHz
• Max. input power: 5W AM (100MHz)
• Nominal impedance: 50 Ohm
• Gain: -18dBi (@100MHz)

 

• ELF, SLF and ULF Magnetic Field Tracking Antenna
• Frequency Range: 1Hz - 9kHz
• Design: Ferrite core, Active
• Internal Amplifier: 25dB (optional 35dB), battery powered (3-4 hours) or continuosly powered via included power supply
• Impedance: 50 Ohm
• RF connector: SMA (female), optional N connector