The new IsoLOG 3D Mobile, Aaronia’s latest development, is an ultra light and small isotropic antenna which is compatible to any spectrum analyzer. It just works on the fly and is a perfect plug and play solution for 3D measurements in limited time frames. The antenna requires no software installation, no power connection and no hardware changes. It is connectable via the N (male) connector to any analyzer or oscilloscope.

Each IsoLOG 3D Mobile includes an internal, rechargeable battery, offering a run-time of 6 hours, and a switchable low noise bypass preamplifier. The integrated amp allows measurements of very low-powered signals. Thus, used in bypass mode, the antenna is still usable for high field-strengths. The control of the antenna is done via USB or via manual antenna selection mode, requiring no USB connection.

Aaronia also integrated an ultra fast adjustable �chopper" function. Using special, glitch free RF switches this feature offers an automatic endless antenna rotation/selection with a switching duration of up to 50kHz. This feature transforms the IsoLOG 3D Mobile into a fully functional 3D antenna without the need of any USB software control.

Shipped in a waterproof transport-case, accompanied with a pistol grip with tripod functionality, the scope of delivery leaves nothing to be desire.

Made in Germany:

All Aaronia antennas are developed, individually produced and calibrated in Germany at the Aaronia factory. This guarantees highest standards so that Aaronia can offer every customer a full 10 years warranty for all EMC antennas.

Examples for possible analysis and measurements within frequency range (9kHz - 6GHz):

Unwanted Surveillance Signals
Tetra/BOS
ISM434
LTE800
ISM868
GSM900
GSM1800
GSM1900
DECT
UMTS
WLAN
Microwave
Bluetooth
WiFi
LTE2.6
WiMAX
5GHz WLAN
PAR Radar
Directional Radio
Miscellaneous satellite applications
etc.

Standard accessories

Included in delivery

Handheld Isotropic Antenna IsoLOG 3D Mobile

Pistol Grip with Tripod Function

Waterproof Transport-Case

SMA to N Adapter

Power Supply

More products AARONIA

BROADBAND RF ANTENNA FOR TESTING 380MHZ..10GHZ AARONIA HYPERLOG 30100

• Compatible with any Spectrum Analyzer brand
• Design: Directional Logarithmic-Periodic
• Frequency range: 380MHz to 10GHz
• Max. input power: 100W AM (400MHz)
• Nominal impedance: 50 Ohm
• VSWR: <1:2,5 (typ.)
• Gain: 5dBi (typ.)

AARONIA MDF 9400 MAGNETIC FIELD TRACKING ANTENNA 9KHZ..400MHZ

• Compatible with any Spectrum Analyzer brand
• Design: Loop
• Frequency Range: 9kHz - 400MHz (1MHz - 40MHz with max. +/- 0,3dB deviation)
• Max. input level: 5W (usable as transmitting antenna)
• Conversion factor: 1 (0 dB A/m is 0dBm)
• Impedance: 50 Ohm
• RF connector: SMA (female)

AARONIA OMNILOG 30800 OMNI-DIRECTIONAL ISOTRPIC RADIAL ANTENNA 300MHZ..8GHZ

• Design: Omni-Directional (radial isotropic)
• Frequency range: 300MHz to 8GHz
• Nominal impedance: 50 Ohm
• Peak Gain: 6.5dBi
• Avg. Gain: 3.5dBi
• Avg. VSWR: 2.5
• RF connection: SMA (m) or N (see optional adapter)

MILITARY OUTDOOR SPECTRUM ANALYZER FOR LOW FREQUENCY 1HZ..30MHZ AARONIA NF-XFR

• Frequency: 1Hz to 20MHz (30MHz)
• Analog Input 200nV to 200mV (typ.)
• Resolution (RBW): 0,3Hz to 10MHz (1-3-10 step)
• Units: Volt
• Detectors: RMS, Min/Max
• Demodulator: AM, FM

ELECTRIC & MAGNETIC NEAR FIELD EMC ANTENNA PROBE SET SNIFFER DC..6GHZ AARONIA PBS1/ PBS2

• Near Field Probes compatible with any Spectrum Analyzer or Measurement Receiver
• Design: Active E & H near field probes
• Frequency range: DC (1Hz) to 6GHz
• Nominal impedance: 50 Ohm
• Preamplifier: UBBV2 (40dB, DC to 8GHz)
• Gain: Diff. Depending on probe (see data sheets)

MILITARY OUTDOOR SPECTRUM ANALYZER FOR HIGH FREQUENCY 1MHZ..9.4GHZ AARONIA HF-XFR

• Frequency range: 1MHz to 9,4GHz
• DANL: -170dBm(1Hz)
• Max. power: +20dBm (opt. +40dBm)
• Lowest sample time: 5mS
• Resolution (RBW): 200Hz to 50MHz
• EMC filter: 200Hz, 9kHz, 120kHz, 200kHz, 1,5MHz, 5MHz
• Units: dBm, dBµV, V/m, A/m, W/m², dBµV/m, W/cm² etc.

ACTIVE DIRECTIONAL BROADBAND ANTENNA 700MHZ..6GHZ AARONIA HYPERLOG 7060

• Compatible with any Spectrum Analyzer brand
• Design: Directional Logarithmic-Periodic
• Frequency range: 700MHz to 6GHz
• Max. input power: 50W AM (800MHz)
• Nominal impedance: 50 Ohm
• VSWR: <1:2 (typ.)
• Gain: 5dBi (typ.)

USB RF SPECTRUM ANALYZER FOR PC 1MHZ..9.4GHZ AARONIA HF60100X

• Frequency range: 1MHz to 9,4GHz
• DANL: -155dBm(1Hz)
• DANL with Preamp: -170dBm(1Hz)
• Max. power: +20dBm (opt. +40dBm)
• Lowest sample time: 5mS
• Resolution (RBW): 200Hz to 50MHz
• EMC filter: 200Hz, 9kHz, 120kHz, 200kHz, 1,5MHz, 5MHz

MODULAR SPECTRUM ANALYZER RACK 19INCH 1HZ..30MHZ AARONIA SPECTRAN NF RSA5000

• Frequency range: 1Hz to 1MHz (30MHz)
• Analog Input: 2µV to 200mV (typ.)
• With opt. DDC:200nV to 200mV (typ.)
• Resolution (RBW): 0,3Hz to 1MHz(1-3-10 step)
• Units: Volt
• Detectors: RMS, Min/Max
• Demodulator: AM, FM

MAGNETIC & ELECTRIC FIELD ANALYZER FOR LOW FREQUENCY 10HZ..10KHZ AARONIA SPECTRAN NF1010E

• Frequency range: 10Hz to 10kHz
• Magnetic field (Tesla): 1pT to 100µT (typ.)
• Magnetic field (Gauss): 100µG to 1G (typ.)
• Electric field: 1V/m to 2.000V/m (typ.)
• Resolution (RBW): 1Hz to 3kHz (1-3-10 step)
• Units: V/m, T, G, A/m
• Interface: USB 2.0/1.1