The C.A 8230 single-phase or balanced three-phase power analyser is economical and extremely easy to use. Equipped with direct access to its various functions, it provides greater safety as it automatically recognises the type of connected sensor. It is ideal for on-site or bench-top use.

It provides you with all the power measurements you need. It will enable you to measure and qualify your electrical network harmonics. An Inrush mode for starter currents will show your waveform in detail during several seconds. Like the Qualistar, the C.A 8230 has a recording mode and a trigger mode for alarms.

The Dataviewer software expands its possibilities for configuration, data transfer and processing on a PC.

½ Voltage range: 6VRMS to 600VRMS AC+DC

½ AC current range: 5mA to 6,500A

½ DC current range: 1A to 1,700A

½ Values: Min., Max., Avg., Peak (+/-), CF

½ Power: W, VA, var, DF, THD, cos f, tan f

½ Energy: Wh, VAh, varh

½ Harmonics: up to the 50th order

½ IEC1010/EN61010: Cat.III-600V

Accesorii standard

TO ORDER

½ C.A 8230 analyser alone... P01160630

½ C.A 8230 analyser with MN93A current sensor (120 A).. P01160631

½ C.A 8230 analyser with AmpFlex 450 flexible current sensor (6,500 A).. P01160632

½ C.A 8220 analyser alone.... P01160620

½ C.A 8220 analyser with MN93A current sensor (120 A) P01160621

½ C.A 8220 analyser with AmpFlex 450 flexible current sensor (6,500 A).. P01160622

P01160630 : one C.A 8230 instrument supplied with 1 carrying

bag, 6 fitted 1.2 V rechargeable batteries, 1 red banana

lead (straight-straight), 1 black banana lead (straight-straight),

2 x 4 mm test probes (1 red, 1 black), 2 crocodile clips (1 red,

1 black), 1 mains adapter, 1 optical USB cable and Power

Analyzer Transfer software.

P01160620 : one C.A 8220 instrument supplied with 6 fitted

AA batteries, 1 red banana lead (straight-straight), 1 black

banana lead (straight-straight), 2 x 4 mm test probes (1 red,

1 black), 2 crocodile clamps (1 red, 1 black), 1 optical USB

cable and Power Analyzer Transfer software.

Optiuni recomandate

½ 4 mm red and black test probes... P01295454Z

½ Red and black crocodile clips.. P01295457Z

½ 4 mm red and black banana/banana leads. P01295451Z

½ MN93A BK clamp. P01120434

½ MN93 BK clamp..... P01120425

½ AmpFlex A193 450 mm BK. P01120526

½ AmpFlex A193 800 mm BK. P01120531

½ PAC93 BK clamp.. P01120079

½ C193 BK clamp. P01120323

½ Mains adapter.... P01160640

½ E3N clamp. P01120047

½ C.A 8220 / E3N adapter..... P01102081

½ RPM sensor... P01102082

½ Optical/USB cable..... HX0056-Z

½ DataVIEW processing software..... P01102095

½ Carrying bag No 5..... P01298049

½ Pt100 adapter..... HX0091

Alte produse CHAUVIN ARNOUX

ANALIZOR ENERGIE SI TESTER DIAGNOZA MOTOARE CHAUVIN-ARNOUX CA8220

• Voltage and current with instant display
• TRMS AC+DC value
• peak values and THD
• Short-term flicker measurement
• offers instant display of the waveform
• comprehensive power and energy analysis on both single-phase and three-phase systems
• Up to several days½ recording
• Customization of alarm settings

MEGOHMMETRU IZOLATIE 5KV CHAUVIN ARNOUX CA6505

• Adjustable test voltage: 40 V to 5,100 V in 10 or 100 V increments
• 500 V: 10 kO to 2 TO
• 1,000 V: 10 kO to 4 TO
• 2,500 V: 10 kO to 10 TO
• 5,000 V: 10 kO to 10 TO

MEGOHMMETRU IZOLATIE 5KV CHAUVIN ARNOUX CA6547

• wide range from 30k? to 10T? !
• 4 fixed test voltages: 500 / 1,000 / 2500 and 5,000V
• programmable test voltage position: from 40 to 5,100V in increments of 10V or 100V
• giant backlit LCD screen with digital display + bargraph
• qualitative analysis of insulation: automatic calculation of DAR, PI and DD (dielectric discharge) ratios
• plotting of the R(t) curve

TESTER DIGITAL REZISTENTA IMPAMANTARE CHAUVIN ARNOUX CA6423

• earth resistance: 0.00 to 2,000O (3 cal.)
• 3 fault presence indicators to validate the measurement
• measurement frequency: 128Hz
• connection of rods to colour-coded terminals
• a removable captive connection strip between H and S for measurement of 2-wire resistance
• large 2,000-count digital display with 18mm digits: excellent readability

TESTER MULTIFUNCTIONAL INSTALATI ELECTRICE CHAUVIN ARNOUX CA6116

• ALL-IN-ONE tool for electrical installation testing
• compliance with the national and international standards (IEC 60364-6, NF C 15-100, VDE 100, XP C 16-600...
• design, ergonomics, simplicity, rapidity and accuracy
• Suitable for all types of neutral systems (TT, TN, IT)
• large backlit graphic screen

APARAT MASURA REZISTENTA PRIZE PAMANT CHAUVIN ARNOUX CA6470N TERCA3

• extensive measurement ranges: 0.001? to 100 k?
• adjustment of the measurement frequency between 41 Hz and 512 Hz
• 10 times greater accuracy due to its 4-pole measurement method
• measuring soil resistivity
• calculate r automatically by the Wenner or Schlumberger methods

ANALIZOR ENERGIE TRIFAZATA CHAUVIN-ARNOUX CA8334B QUALISTAR

• Complete three-phase analysis:
• - voltage, current,
• - power / energy,
• - harmonics (up to 50th order), flicker,
• - measurement of transients,
• - alarm trigger...
• Processing of data via PC software QualistarView or DataViewer Pro.
• Recording of 12 screens
• Compliant with IEC 61010-1, 600V Cat.IV

APARAT MASURA REZISTENTA IMPAMANTARE PILONI CHAUVIN ARNOUX CA6474

• Ideal for earth measurements on pylons
• measurement range: 0.001 O to 99.99 kO
• resolution: 0.001 to 10 O
• no-load voltage: 16 or 32 VRMS
• measurement frequency: 41 Hz to 5,018 Hz
• measurement of resistance of earth stakes: 0.01 O to 100kO
• leakproofing: IP53

ANALIZOR TRIFAZAT CALITATE ENERGIE CHAUVIN-ARNOUX CA8332B QUALISTAR

• Complete three-phase analysis:
• - voltage, current,
• - power / energy,
• - harmonics (50th rank), flicker,
• - alarm trigger...
• Processing of data with DataView PC software.
• Working memory: 2MB

MEGOHMMETRU IZOLATIE 5KV CHAUVIN ARNOUX CA6549

• measurement range: 10k? to 10T?!
• 4 fixed test voltages: 500 / 1,000 / 2,500 and 5,000V
• adjustable test voltage position: 40 to 5,100V in 10V or 100V increments
• step voltage mode: R(Utest) measurement curve viewed on the screen and gradient calculated automatically in ppm/V
• DAR, PI and DD quality ratios calculated automatically
• programmable test length and R(t) measurement curve